Direct product selection: Petrol brushcutters for mowing around the home and garden

FS 70 RC-E

Robust 0.9 kW petrol brushcutter with ErgoStart and loop handle

General

Additional images

Extremely robust 0.9 kW petrol brushcutter with loop handle. 2-MIX engine consumes up to 20% less fuel and 70% less emissions compared to conventional two-stroke engines without 2-MIX technology. ErgoStart simplified starting procedure for increased comfort. Optimised trimmer angle for working on large areas of tough grass.

Versions

FS 70 RC-E

Note and compare

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Product versions

FS 70 C-E Robust 0.9 kW petrol brushcutter with ErgoStart and bike handle

Technical specifications

Displacement	27,2 cm³
Power output	0,9/1,2 kW/PS
Weight ¹⁾	4,8 kg
Sound pressure level with plastic tool ²⁾	94 dB(A)
Sound power level ²⁾	108 dB(A)
Vibration level, left/right with plastic tool ³⁾	7,6/6 m/s²
Total length ⁴⁾	170 cm
Cutting tool	AutoCut C 25-2

1) Weight excluding fuel, cutting tool and guard
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

Standard equipment

STIHL 2-MIX-Engine

2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
STIHL ErgoStart (E)

STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Basic harness

For use with loop handle machines.
Multi-function control handle

Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
Loop handle (R)

The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.
Simplified starting system

Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
Manual fuel pump (Purger)

A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
Goggles

It is important to protect your eyes from flying particles and harmful UV radiation. Therefore a pair of safety goggles/glasses are supplied with the the machine. Note: Additional face protection must be worn when working with brushcutters.

Retrofitted equipment

ADVANCE Universal Harness

Soft padding makes work more comfortable during longer jobs.
ADVANCE PLUS Universal harness

With a comfort carry ring for quickly attaching an removing the clearing saw.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Cutting Tools

- TrimCut mowing head
  
  Double line, for mowing and thinning work. Mowing lines are extended by hand.
Versions
- TrimCut 31-2, 2.4 mm
  Note and compare
- AutoCut C mowing head (2-line)
  
  Double lines, for mowing and thinning work. Mowing lines are automatically extended when the mowing head is tapped on the ground. With comfort grip for easy re-loading.
Versions
- Mowing head AutoCut C 25-2, 2.4mm
  Note and compare
- SuperCut mowing head (2 line)
  
  Double line, for mowing and thinning work. Mowing lines are automatically adjusted for optimal cutting length.
Versions
- Mowing line SuperCut 20-2
  Note and compare
- DuroCut mowing head
  
  Double or quadruple lines, for mowing and thinning work. Up to four lines can be easily inserted. Compatible with many different sizes and types of mowing line.
Versions
- DuroCut 20-2
  Note and compare
- Grass cutting blade (4 blades)
  
  Made of steel. With four cutters for mowing thick, dry grass and reeds
Versions
- Grass cutting blade 230 mm (4 blade)
  Note and compare

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

- AutoCut C mowing head (2-line)
  
  Double lines, for mowing and thinning work. Mowing lines are automatically extended when the mowing head is tapped on the ground. With comfort grip for easy re-loading.
Versions
- Mowing head AutoCut C 25-2, 2.4mm
  Note and compare
- Protective cover for brushcutters
  
  Perfect transport protection for the engine housing of brushcutters and clearing saws. For FS 38 - FS 450.
Versions
- Protective cover for brushcutters
  Note and compare
- DuroCut mowing head
  
  Double or quadruple lines, for mowing and thinning work. Up to four lines can be easily inserted. Compatible with many different sizes and types of mowing line.
Versions
- DuroCut 20-2
  Note and compare
- Set of plastic blades
  
  For PolyCut, twelve plastic blades.
Versions
- 12 plastic blades
  Note and compare
- ADVANCE universal harness, fluorescent orange
  
  High visibility. Perfectly complements protective clothing when mowing in hazardous areas, with a comfort carry ring for quickly attaching and removing the clearing saw, for FS 50 – FS 560 and FSA 90.
Versions
- ADVANCE universal harness, fluorescent orange
  Note and compare
- Guard for metal mowing tools
  
  Protection against flying cuttings.
Versions
- Guard for metal mowing tools, Ø 230mm
  Note and compare
- Chest belt
  
  Ensures the shoulder straps are securely positioned. For BR 200, BR 350, BR 430, BR 450, BR 500 and BR 600.
Versions
- Chest belt ADVANCE
  Note and compare
- Guard for mowing heads and PolyCut
  
  Guard for working with mowing heads. Provides protection against flying debris but still enables a clear view of the area to be mown.
Versions
- Guard for Mowing head, Ø 420mm
  Note and compare
- ADVANCE universal harness
  
  Extremely ergonomic, comfortable and light. For strength-saving mowing and shredding. Chest belt and tool bag also available. Suitable for FS 50 - FS 550.
Versions
- ADVANCE universal harness, Standard size
  Note and compare
- Tool bag
  
  A practical way of transporting tools. Two compartments. Easily attached to the universal or forestry harness.
Versions
- Tool bag ADVANCE
  Note and compare
- Protective cover for brushcutters
  
  Perfect transport protection for the engine housing of brushcutters and clearing saws. For FS 38 - FS 450.
Versions
- Protective cover for brushcutters
  Note and compare

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Documents

Owners manuals and safety brochures

STIHL FS 70 (D)	Download	PDF, 1,6 MB
STIHL FS 70 (D, F, I, NL)	Download	PDF, 5,2 MB

Notes:

STIHL online owner’s manuals are usually for the latest versions of the machine. Your product may be a slightly older production model but the manual will still be appropriate for the relevant model number
The languages contained in the document are also displayed in brackets, for example (GB) = English

FS 70 RC-E

Robust 0.9 kW petrol brushcutter with ErgoStart and loop handle