Direct product selection: Petrol brushcutters for mowing around the home and garden

FS 70 C-E

FS 70 C-E petrol-driven brushcutter: Easy mowing of larger green areas

General

Extremely robust 0.9 kW brushcutter with bike handle and 2-MIX engine. Simplified starting procedure. Increased starting comfort with ErgoStart. Up to 20% lower fuel consumption and 70% reduction in exhaust emissions compared to conventional two-stroke engines without 2-MIX technology. 4-bladed grass-cutting blade for mowing large areas of tough grass. Also suitable for thinner bushes or reeds.

Versions

FS 70 C-E

Note and compare

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Product versions

FS 70 RC-E FS 70 RC-E petrol-driven brushcutter: robust and comfortable

Technical specifications

Technical specifications

Technical specifications	Value
Displacement	27,2 cm³
Power output	1/1,2 kW/bhp
Weight ¹⁾	5,4 kg
Sound pressure level ²⁾	94 dB(A)
Sound power level ²⁾	108 dB(A)
Vibration level, left/right with plastic tool ³⁾	7/5,5 m/s²
Total length ⁴⁾	170 cm
Cutting tool	Grass cutting blade 230-2

1) Weight excluding fuel, cutting tool and guard
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

Standard equipment

ERGONOMIC BIKE HANDLE

EFFORTLESS MOWING OF LARGE AREAS. The ergonomic bike handle helps you mow large areas quickly and effortlessly, as this handle supports a natural brushcutter movement. The bike handle is easy to adjust and secure.
STIHL ErgoStart (FT)

STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
STOP BUTTON

RESTART WORK QUICKLY. With the stop button, you can switch off your power tool quickly and easily for a short break, for example. As the button springs back to its original position after actuation, the engine is immediately ready to start again. This provides more comfort after breaks and increases your work efficiency.
STIHL 2-MIX-Engine

2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Multi-function control handle

Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
Basic harness

For use with loop handle machines.
Manual fuel pump (Purger)

A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
Goggles

It is important to protect your eyes from flying particles and harmful UV radiation. Therefore a pair of safety goggles/glasses are supplied with the the machine. Note: Additional face protection must be worn when working with brushcutters.

Retrofitted equipment

ADVANCE PLUS Universal harness

With a comfort carry ring for quickly attaching an removing the clearing saw.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Cutting Tools

- AutoCut C mowing head (2-line)
  
  Double lines, for mowing and thinning work. Mowing lines are automatically extended when the mowing head is tapped on the ground. With comfort grip for easy re-loading.
Versions
- Mowing head AutoCut C 25-2, 2.4mm
  Note and compare
- GrassCut Grass cutting blade (4 blades)
  
  Made of steel. With four cutters for mowing thick, dry grass and reeds
Versions
- Grass cutting blade 230 mm (4 blade)
  Note and compare
- SuperCut mowing head (2 line)
  
  Double line, for mowing and thinning work. Mowing lines are automatically adjusted for optimal cutting length.
Versions
- Mowing line SuperCut 20-2
- AutoCut mowing head C 26-2
  
  Double lines, for mowing and thinning work. Mowing lines are automatically extended when the mowing head is tapped on the ground.
Versions
- AutoCut mowing head C 26-2
  Note and compare
- DuroCut mowing head 20-2
  
  Double lines, for mowing and thinning work. Up to four lines can be easily inserted. Compatible with many different sizes and types of mowing line.
Versions
- DuroCut 20-2
  Note and compare
- GrassCut Grass cutting blade (4 blades)
  
  Made of steel. With four cutters for mowing thick, dry grass and reeds
Versions
- Grass cutting blade 230 mm (4 blade)
- SuperCut mowing head (2 line)
  
  Double line, for mowing and thinning work. Mowing lines are automatically adjusted for optimal cutting length.
Versions
- Mowing line SuperCut 20-2
  Note and compare
- TrimCut mowing head C 32-2
  
  Double line, for mowing and thinning work. Mowing lines are extended by hand.
Versions
- TrimCut mowing head C 32-2, Ø 2,4 mm
  Note and compare

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

- Line pieces for DuroCut mowing head
  
  Replacement line pieces for DuroCut mowing head.
Versions
- For DuroCut 20-2 and 40-4, XL
  Note and compare
- Protective cover for brushcutters
  
  Perfect transport protection for the engine housing of brushcutters and clearing saws. For FS 38 - FS 450.
Versions
- Protective cover for brushcutters
  Note and compare
- Plastic blades for PolyCut 6-3, 7-3, 20-3, 41-3
  
  For PolyCut, twelve plastic blades.
Versions
- 12 plastic blades
  Note and compare
- Chest belt
  
  Ensures the shoulder straps are securely positioned. For BR 200, BR 350, BR 430, BR 450, BR 500 and BR 600.
Versions
- Chest belt ADVANCE
  Note and compare
- ADVANCE universal harness, fluorescent orange
  
  High visibility. Perfectly complements protective clothing when mowing in hazardous areas, with a comfort carry ring for quickly attaching and removing the clearing saw, for FS 50 – FS 560 and FSA 90.
Versions
- ADVANCE universal harness, fluorescent orange
- ADVANCE universal harness
  
  Extremely ergonomic, comfortable and light. For strength-saving mowing and shredding. Chest belt and tool bag also available. Suitable for FS 50 - FS 550.
Versions
- ADVANCE universal harness, Standard size
  Note and compare
- Tool bag
  
  A practical way of transporting tools. Two compartments. Easily attached to the universal or forestry harness.
Versions
- Tool bag ADVANCE
  Note and compare
- Protective cover for brushcutters
  
  Perfect transport protection for the engine housing of brushcutters and clearing saws. For FS 38 - FS 450.
Versions
- Protective cover for brushcutters
  Note and compare

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Documents

Owners manuals and safety brochures

Languages	Date	Link
de	05.04.2023	Download PDF Download PDF

FS 70 C-E

FS 70 C-E petrol-driven brushcutter: Easy mowing of larger green areas