STIHL’s lightest carving saw. Easy and effortless starting thanks to a manual fuel pump and STIHL ErgoStart. Equipped with the STIHL Carving guide bar and 1/4" PM3 saw chain for precise and safe work. New 2-MIX engine for improved cutting performance.
Versions
-
MS 151 C-E, 1/4"P, Bar length 30cm
Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.
Technical specifications
Technical specifications |
Value |
Displacement
|
23,6
cm³
|
Power output
|
1,1/1,5
kW/PS
|
Weight
1)
|
2,8
kg
|
Power-to-weight ratio
|
2,5
kg/kW
|
Saw chain pitch
|
1/4"P
|
Sound pressure level
2)
|
96
dB(A)
|
Sound power level
3)
|
110
dB(A)
|
Vibration level left/right
4)
|
4,9/4,9
m/s²
|
1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 (dB (A))
3) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
4) K-factor according to DIR 2006/42/EC = 2m / s ²
Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.
Standard equipment
-
STIHL ANTI-VIBRATION SYSTEM
FOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.
-
COMPENSATOR
REDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.
-
STIHL 2-MIX ENGINE
HIGHLY POWER-EFFICIENT. With the STIHL 2-MIX engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.
-
STIHL ERGOSTART
EFFORTLESS STARTING. STIHL ErgoStart saves you energy when starting your power tools. A smooth and even pull on the starter cord is all that’s needed. The required speed on the starter cord is significantly reduced, and the engine starts quickly and reliably even with a slow pull. An additional spring between the crankshaft and the starter cord roll makes this easier.
-
STIHL FOUR-CHANNEL TECHNOLOGY
FOR LOWER FUEL CONSUMPTION AND HIGH PERFORMANCE. Thanks to STIHL four-channel technology, you can work with your power tool with very low fuel consumption and high performance. The four overflow channels guide the fuel-and-air mixture into the cylinder in a targeted and more compressed manner, which optimally burns the fuel and significantly increases the performance of the engine.
-
SIDE-MOUNTED CHAIN TENSIONING
FOR SIMPLE AND SECURE RE-TENSIONING. Side-mounted chain tensioning allows for protected, easy and quick chain tensioning and replacement. The tensioning screw is inserted laterally through the sprocket cover.
-
SERVICING-FRIENDLY AIR FILTER SYSTEM
MAKES CLEANING EASIER. The shroud has been practically designed to be opened with just one movement and without tools. This makes it easier to clean your chainsaw’s air filter.
-
Tool free fuel caps
Special caps to open and close the tank cap quickly, easily and without tools.
Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.
Accessories
-
-
Chainsaw case
For storage and transport of all battery-powered and petrol chainsaws with bar lengths up to 45 cm (not suitable for electric chainsaws and petrol chainsaws MS 441 C-M, MS 461, MS 661 C-M and MS 880).
-
-
Scabbard for MS 150, 35 cm bar length
Robust scabbard for the safe transport and storage of your chainsaw.
Versions
-
Scabbard for MS 150, 35 cm bar length
Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.