FSA 45 with integrated battery

Compact cordless brushcutter for straightforward trimming and clearing work in outdoor areas at home. Integrated battery with charge level indicator, shaft and loop handle offering tool-free adjustment, adjustable mowing unit working angle (useful for vertical edge trimming among other tasks), easy to switch between PolyCut blades and mowing lines without changing the mowing head, spacer bracket.

Versions

FSA 45

Note and compare

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Technical specifications

Technical specifications	Value
Cutting tool	PolyCut 2-2
Battery Technology	Lithium-Ion AI-Line
Weight ¹⁾	2,3 kg
Sound pressure level ²⁾	77 dB(A)
Sound power level ²⁾	87 dB(A)
Vibration level, left/right with plastic tool ³⁾	1,7/4,9 m/s²
Total length ⁴⁾	110 cm
Cutting diameter	250 mm
Cutting tool	PolyCut 2-2
Battery life time with PolyCut 2-2 ⁵⁾	up to 20 min
Battery life time with mowing head ⁵⁾	up to 12 min

1) including battery
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without tools
5) Battery life times are approximate and may vary depending on application

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Standard equipment

Telescopic shaft

With 8 adjustable positions along a length of 170 mm, the FSA can be optimised to match the user's size, ensuring ergonomic working and a less tiring job – and without the need for a separate tool.
Adjustable loop handle

The loop handle can be adjusted in 6 increments up to an angle of 120°.
Adjustable mowing head

The mowing head can be tilted in 4 increments up to an angle of 48°.
Vertical edge trimming

The mowing head can pivot through 90° for precise lawn edge trimming.
Charge level indicator

The remaining working or charging time can be viewed at any time by pressing the button. Four LEDs light up, or flash green or red, to indicate the charging state or problems.
Storing spare blades

The PolyCut blades can be easily replaced if worn. Up to five spare blades can be conveniently stored on the tool.
Spacer bracket

The FSA 45 has a spacer bracket for precise and efficient trimming around plants and other objects. It can be folded out or down as required.
Activation key

The tool can only be used with the activation key. If the key is removed, the tool switches off to guard against unintentional activation. The tool can be safely stored and transported.
Charger cable

The STIHL HSA 45 draws its power from an integrated 18V lithium-ion battery. The battery is easily charged using the charger cable.
Compact and ergonomic

The integrated battery cells mean that the tool is optimally balanced. The FSA is easy to handle. Its streamlined design creates plenty of room for manoeuvre.
Quiet operation

The STIHL AK-System devices are so quiet you don't even need ear protection.
Soft handle and hanging eye

Thanks to the soft handle with lever lock function and lever, the user always has the cordless brushcutter safely under control. The eye for wall mounting means that the FSA can be safely stored in a compact space.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Cutting Tools

- PolyCut mowing head 2-2
  
  Universal cutting tool for trimming and working on large areas. With two or three mobile plastic blades.
Versions
- Mowing head PolyCut 2-2
  Note and compare
- PolyCut mowing head 3-2
  
  Universal cutting tool for trimming and working on large areas. With two or mobile plastic blades.
Versions
- PolyCut mowing head 3-2
  Note and compare

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.