Direct product selection: Extended length hedge trimmers

HL 94 C-E

HL 94 C-E petrol-driven long-reach hedge trimmer: comfortable and flexible working on tall, long and wide hedges

General

For professional work on tall hedges and use close to the ground. Reduced-weight transmission, 2-MIX engine with ECOSPEED for speed control when working for long periods in noise-sensitive areas, STIHL ErgoStart, cutter bar adjustable by 145°. Total length: 242 cm.

Versions



Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Technical specifications

HL 94 C-E

Technical specifications

Technical specifications Value
Displacement 24,1 cm³
Power output 0,9 / 1,2 kW/bhp
Weight 1) 6,1 kg
Total length 2) 242 cm
Sound pressure level 3) 91 dB(A)
Blade length 60 cm
Sound power level 3) 106 dB(A)
Vibration level left/right 4) 4,1/4,5 m/s²
Power output 0,9/1,2 kW/bhp
Stroke rate 3.615 1/min
Tooth spacing 34 mm
Weight 6,2 kg
Weight 13,7 lbs
Tooth spacing 34 mm

1) Complete, without fuel
2) Complete
3) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
4) (K) factor according to Dir. 2006/42/EC = 2m/s²

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

HL 94 C-E

Standard equipment

  • STIHL 2-MIX-Engine Zoom
    STIHL 2-MIX-Engine

    The STIHL 2-mix engine specially designed for the new generation of hedge trimmer combines low consumption and emissions ​​with low weight and excellent acceleration. There are also always sufficient power reserves for cutting thicker shrubs.

  • STIHL ErgoStart (FT) Zoom
    STIHL ErgoStart (FT)

    A genuine advance in easy starting. STIHL ErgoStart (E) cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. All it takes is 2 fingers and a gentle pull action.

  • Manual fuel pump (purger) Zoom
    Manual fuel pump (purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.

  • STIHL ECOSPEED Zoom
    STIHL ECOSPEED

    With the ECOSPEED function, you can use your long reach hedge trimmer in a more economical operating mode. Simply turn the wheel to the minus direction, thereby reducing the maximum engine speed. This keeps your long reach hedge trimmer running at partial load; however, despite this limited setting, you can shift to full capacity when necessary by pressing the throttle lever. Operating at partial load reduces fuel consumption and you can work much longer with one tank.

  • Blade system Zoom
    Blade system

    Double-sided cutting blades ensure a powerful and precise cut even through thicker branches.

  • Quick-release adjustment system Zoom
    Quick-release adjustment system

    The cutter bar can be adjusted in increments up to 145° in two directions. To save space, the cutter bar can be folded parallel to the shaft, and locked, for transport.

  • Loop handle Zoom
    Loop handle

    The loop handle gives you maximum flexibility and easy operation even in confined working conditions.

  • Shoulder strap / carrying system Zoom
    Shoulder strap / carrying system

    Using a STIHL shoulder strap or carrying harness with soft padding makes work more comfortable, particularly during lengthy jobs.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

HL 94 C-E

Accessories

    • Tip protector Zoom
      Tip protector

      Prevents the end of the cutter bar from getting damaged while working close to walls and the ground (not suitable for HLA).

    Versions

    • RTS harness Zoom
      RTS harness

      For prolonged use. Can be adjusted to the user's size, makes particularly effortless and ergonomic work possible. Can be used with the HT 101, HT 103, HT 131, HT 133, HTA 65, HTA 85, HTE 60, KombiEngines with HT-KM or HL-KM 145° (not KMA 130 R), HL 94 C-E (not HL 94 KC-E), HLA 65, HLA 85 and HLE 71 (not HLE 71 K).

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Documents

Owners manuals and safety brochures

Languages Date Link
manual icon de 14.12.2016