Direct product selection: Cut off machines

TS 700

Extremely powerful 5.0 kW Cut-off saw (350mm/14")

General

Very powerful 5.0 kW engine with 350 mm cutting wheel. Includes a long life air filter system with cyclone air routing. Ergonomic design with optimised handling positions. ElastoStart plus, compensator and decompression valve. Water attachment and composite cutting wheel come as standard. Can be operated by hand or mounted on a FW 20 cart. Supplied with abrasive cutting wheel.

Versions



Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Technical specifications

Technical specifications

Technical specifications Value
Displacement 98,5 cm³
Power output 5/6,8 kW/bhp
Weight 1) 11,7 kg
Sound pressure level 2) 101 dB(A)
Cutting wheel 350 / 14 mm/in
Sound power level 2) 113 dB(A)
Max. cutting depth 125 mm
Vibration level left/right 3) 6,6/4,5 m/s²

1) Weight excluding fuel and cutting wheel
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

Standard equipment

  • STIHL 2-MIX engine with stratified charge system Zoom
    STIHL 2-MIX engine with stratified charge system

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • STIHL ElastoStart Zoom
    STIHL ElastoStart

    STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.

  • Magnesium guard Zoom
    Magnesium guard

    The cutting wheel guard made from die-cast magnesium is particularly light. The guard and water attachment feature a particularly ergonomic design.

  • Ergonomic grip position Zoom
    Ergonomic grip position

    The modern, ergonomic design allows each user to work with an optimal grip position. The loop handle facilitates excellent cutting comfort in any working position.

  • Pre-separation air filtration system Zoom
    Pre-separation air filtration system

    STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

  • Decompression valve Zoom
    Decompression valve

    The decompression valve allows some of the compression pressure in the cylinder to escape, so less force on the starter rope is needed.

  • Anti-vibration system Zoom
    Anti-vibration system

    Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

  • Semi automatic drive belt tensioning Zoom
    Semi automatic drive belt tensioning

    Light, consistent re-tensioning increases the service life of the belts and shaft bearings.

Retrofitted equipment

  • Cut-off saw cart Zoom
    Cut-off saw cart

    Ideal wherever edges have to be cut with particular precision, where a certain cutting depth needs to be maintained, or for cutting long, linear stretches.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

Accessories

    • FW 20 Cart with attachment kit Zoom
      FW 20 Cart with attachment kit

      For exact edges over long cuts, with depths accurate to the millimetre. Suitable for all hand-held STIHL cut-off machines, an attachment kit with a quick-mounting system is included.

    Versions

    • Wheel kit Zoom
      Wheel kit

      Attachment kit for front support. Makes it easier to rest the cut-off saw on the floor. The smooth-running wheels allow the tool to be moved easily across flat, even surfaces. Suitable for TS 410, TS 420, TS 480i, TS 500i, TS 700 and TS 800.

    Versions

    • Cutting direction indicator Zoom
      Cutting direction indicator

      Accessory for FW 20 cart.

    Versions

    • Quick Mounting System conversion kit Zoom
      Quick Mounting System conversion kit

      For the FW 20 cart.

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Documents

Owners manuals and safety brochures

Languages Date Link
manual icon de 07.06.2021