Direct product selection: Cut off machines

TS 500i

Innovative 3.9kW cut-off saw with electronically controlled fuel injection

General

Unique STIHL Injection engine technology for 350 mm cutting wheels. Easy to start; powerful torque. Fully-equipped with long-life air filter system and electronic water control. Can be operated by hand or with the FW 20 cart. Supplied with abrasive cutting wheel.

Versions



Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Technical specifications

Technical specifications

Technical specifications Value
Displacement 72,2 cm³
Power output 3,9/5,3 kW/bhp
Weight 1) 10,2 kg
Sound pressure level 2) 98 dB(A)
Cutting wheel 350 / 14 mm/in
Sound power level 2) 112 dB(A)
Max. cutting depth 125 mm
Vibration level left/right 3) 2,4/2 m/s²

1) Weight excluding fuel and cutting wheel
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

Standard equipment

  • STIHL Fuel injection (i) Zoom
    STIHL Fuel injection (i)

    The electronically controlled fuel injection ensures perfect running properties every time and reduces fuel consumption in comparison with tools without injection technology.

  • STIHL 2-MIX engine with stratified charge system Zoom
    STIHL 2-MIX engine with stratified charge system

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • STIHL Electronic water control (A) Zoom
    STIHL Electronic water control (A)

    The electronic water control system can be operated via simple buttons while the engine is running. The water then switches on and off during cutting automatially, depending on engine speed. The water volume can be regulated by simply pressing the plus / minus buttons, ensuring optimum dust suppression at the touch of a button.

  • STIHL ElastoStart Zoom
    STIHL ElastoStart

    STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.

  • Magnesium guard Zoom
    Magnesium guard

    The cutting wheel guard made from die-cast magnesium is particularly light. The guard and water attachment feature a particularly ergonomic design.

  • Ergonomic grip position Zoom
    Ergonomic grip position

    The modern, ergonomic design allows each user to work with an optimal grip position. The loop handle facilitates excellent cutting comfort in any working position.

  • Pre-separation air filtration system Zoom
    Pre-separation air filtration system

    STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

  • Decompression valve Zoom
    Decompression valve

    The decompression valve allows some of the compression pressure in the cylinder to escape, so less force on the starter rope is needed.

  • Anti-vibration system Zoom
    Anti-vibration system

    Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

  • Semi automatic drive belt tensioning Zoom
    Semi automatic drive belt tensioning

    Light, consistent re-tensioning increases the service life of the belts and shaft bearings.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

Accessories

    • STIHL Smart Connector Zoom
      STIHL Smart Connector

      The Smart Connector can be attached to petrol-driven, electric, and cordless products, enabling it to deliver important information about your STIHL power tool via Bluetooth® 4.2. The Smart Connector offers entirely new functions and services, as a basis for device management both in your home garden using the STIHL connected app, and for managing your machine fleet using the STIHL connected Portal.

    Technical specifications Value
    Weight 20 g
    Dimensions (l x b x h) 53 x 42 x 14 mm
    Signal range ca. 10 m
    Running time per battery charge ca. 1 Year
    Connectivity BLE 4,2
    Battery 3V CR 2.032

    Versions

    • Wheel kit Zoom
      Wheel kit

      Attachment kit for front support. Makes it easier to rest the cut-off saw on the floor. The smooth-running wheels allow the tool to be moved easily across flat, even surfaces. Suitable for TS 410, TS 420, TS 480i, TS 500i, TS 700 and TS 800.

    Versions

    • Cutting direction indicator Zoom
      Cutting direction indicator

      Accessory for FW 20 cart.

    Versions

    • Cutting direction indicator Zoom
      Cutting direction indicator

      Accessory for FW 20 cart.

    Versions

    • FW 20 Cart with attachment kit Zoom
      FW 20 Cart with attachment kit

      For exact edges over long cuts, with depths accurate to the millimetre. Suitable for all hand-held STIHL cut-off machines, an attachment kit with a quick-mounting system is included.

    Versions

    • Quick Mounting System conversion kit Zoom
      Quick Mounting System conversion kit

      For the FW 20 cart.

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Documents

Owners manuals and safety brochures

Languages Date Link
manual icon de 07.07.2022