Direct product selection: Petrol chainsaws for property maintenance

MS 230 C-BE

Comfort chainsaw with ErgoStart (E) and Chain Quick Tensioning (B).

General

The MS 230 C-BE features additional "Comfort" characteristics, such as the ErgoStart (E) system, allowing for a virtually effortless jerk-free start. With the exclusive Chain Quick Tensioning (B) and a high power-to-weight ratio, the MS 230 C-BE weighs in as an upper end member of our occasional use range of chainsaws. Available with 14"/35cm or 16"/40cm guide bars.

Versions



Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Product versions

  • MS 230 Practical chainsaw built for a variety of cutting tasks

Technical specifications

MS 230 C-BE

Technical specifications

Technical specifications Value
Displacement 45,4 cm³
Power output 2/2,7 kW/bhp
Weight 1) 4,9 kg
Power-to-weight ratio 2,5 kg/kW
Sound pressure level 2) 101 dB(A)
Sound power level 3) 111 dB(A)
Vibration level left/right 4) 5/6 m/s²
Saw chain pitch 3/8"P
STIHL Oilomatic saw chain type Picco Micro 3 (PM3)

1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 (dB (A))
3) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
4) K-factor according to DIR 2006/42/EC = 2m / s ²

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

MS 230 C-BE

Standard equipment

  • STIHL ERGOSTART Zoom
    STIHL ERGOSTART

    A spring between the starter cord reel and crankshaft relieves the strain when starting, meaning that excessive pulling on the cord is no longer needed. The result is a convenient starting procedure with practically.

  • STIHL Quick Chain Tensioning (B) Zoom
    STIHL Quick Chain Tensioning (B)

    With STIHL Quick Chain Tensioning, it's easy to adjust the saw chain, without tools and without coming into contact with the sharp saw chain itself. Just release the sprocket cover and turn the adjusting wheel to set the optimum tension.

  • Carburettor heating (V) Zoom
    Carburettor heating (V)

    By changing the chain saw from summer to winter operation, the intake air is pre-heated over the engine fins. This ensures that the carburettor does not ice up and you can continue working in freezing temperatures.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    STIHL chainsaws and pole pruners with manual fuel pumps allow improved starting with a reduced number of starting pulls. Pressing the primer fills the carburettor control chamber with fuel. This ensures that there is sufficient fuel present to create an ignitable air-fuel mix on starting, requiring significantly fewer starting pulls.

  • STIHL anti-vibration system Zoom
    STIHL anti-vibration system

    Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

  • STIHL Ematic System Zoom
    STIHL Ematic System

    Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

  • Single-lever master control Zoom
    Single-lever master control

    All important functions such as start, choke, throttle and stop are operated via a single lever.

  • Tool free fuel caps Zoom
    Tool free fuel caps

    Special caps to open and close the tank cap quickly, easily and without tools.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

MS 230 C-BE

Accessories

    • Chainsaw bag Zoom
      Chainsaw bag

      For tidy storage and transport of chainsaws with bar lengths up to 45 cm.

    Versions

    • Combination socket tool Zoom
      Combination socket tool

      For tensioning the chain and changing the chain, bar and spark plug. Width across flats: 19 (for MS 261 up), 19-13 (for MS 271, MS, 291, MS 311, MS 391), 19–16 (for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241, MS 251), 16 and 13 ( for MS 150, MS 201, MS 201 T).

    Versions

    • Multi-function tool Zoom
      Multi-function tool

      Practical, multi-function quality tool in a sturdy plastic case. 3.5 mm flat-blade screwdriver for carburettor adjustment and cleaning grooves, Torx® TX 27 screwdriver, nylon pouch with belt loop. Width across flats 19-13 for MS 271, MS 291, MS 311 and MS 391, width across flats 19-16 for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.

    Versions

    • Multi function tool, size across flats 19 - 13

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.