MS 231 C-BE with Duro 3 saw chain

• 

  STIHL QUICK CHAIN TENSIONING

  RE-TENSION THE SAW CHAIN TOOL-FREE. Thanks to STIHL Quick Chain Tensioning, you can tension your saw chain quickly and without tools, thanks to the adjusting wheel. Turning the adjusting wheel to the left releases tension on the saw chain, and turning the adjustment wheel to the right tensions the saw chain. The guide bar will be automatically secured when you tighten the sprocket cover.

• 

  STIHL 2-MIX ENGINE

  HIGHLY POWER-EFFICIENT. With the STIHL 2-MIX engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.

• 

  STIHL ERGOSTART

  EFFORTLESS STARTING. STIHL ErgoStart saves you energy when starting your power tools. A smooth and even pull on the starter cord is all that’s needed. The required speed on the starter cord is significantly reduced, and the engine starts quickly and reliably even with a slow pull. An additional spring between the crankshaft and the starter cord roll makes this easier.

• 

  CARBURETTOR PRE-HEATING

  FOR RELIABLE OPERATION EVEN IN WINTER. Thanks to carburettor preheating, you can work reliably with your chainsaw even in winter. You can change the operation from summer to winter mode in just one simple step. In the winter setting, pre-heated intake air flows around the carburettor, preventing it from icing up.

• 

  COMPENSATOR

  REDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.

• 

  Manual fuel pump (Purger)

  STIHL chainsaws and pole pruners with manual fuel pumps allow improved starting with a reduced number of starting pulls. Pressing the primer fills the carburettor control chamber with fuel. This ensures that there is sufficient fuel present to create an ignitable air-fuel mix on starting, requiring significantly fewer starting pulls.

• 

  STIHL ANTI-VIBRATION SYSTEM

  FOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.

• 

  Single-lever master control

  All important functions such as start, choke, throttle and stop are operated via a single lever.

• 

  Tool free fuel caps

  Special caps to open and close the tank cap quickly, easily and without tools.

Retrofitted equipment

• 

  LONG-LIFE AIR FILTER SYSTEM FOR CHAINSAWS

  EXTENDED FILTER SERVICE LIFE. Pre-separation routing removes coarse, larger particles from the airstream before they can reach the actual filter. The HD2 filter keeps even fine dust away from the engine, ensuring a long engine service life, long cleaning intervals and easy maintenance of your chainsaw. When we refer to a long-life air filter system in chainsaws, this exclusively describes models that have pre-separation routing and an HD2 filter. With this system, you benefit from a significantly longer filter service life compared to conventional air filter systems.

• 

  HD2-FILTER

  INCREASES SERVICE LIFE. The HD2 filter protects your power tool’s engine against even the finest dust, ensuring a longer service life and reduced wear. The filter made from PET material has up to 70% finer pores than fleece and polyamide filters, and is also oil- and water-repellent. This also makes it easier to clean the filter. When needed, the filter cartridge can be easily replaced without tools.

• • 

    Combination socket tool

    For tensioning the chain and changing the chain, bar and spark plug. Width across flats: 19 (for MS 261 up), 19-13 (for MS 271, MS, 291, MS 311, MS 391), 19–16 (for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241, MS 251), 16 and 13 ( for MS 150, MS 201, MS 201 T).

  Versions

  • Combination socket tool

• • 

    Chainsaw bag

    For tidy storage and transport of chainsaws with bar lengths up to 45 cm.

  Versions

  • Carry bag for chainsaws
    Note and compare

• • 

    Chainsaw case

    For storage and transport of all battery-powered and petrol chainsaws with bar lengths up to 45 cm (not suitable for electric chainsaws and petrol chainsaws MS 441 C-M, MS 461, MS 661 C-M and MS 880).

  Versions

  • Chainsaw case
    Note and compare

• • 

    Combination socket tool, width across flats 19–16

    For tensioning the chain and changing the chain, bar and spark plug. Suitable for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.

  Versions

  • Combination socket tool, width across flats 19–16
    Note and compare

• • 

    Multi-function tool

    Practical, multi-function quality tool in a sturdy plastic case. 3.5 mm flat-blade screwdriver for carburettor adjustment and cleaning grooves, Torx® TX 27 screwdriver, nylon pouch with belt loop. Width across flats 19-13 for MS 271, MS 291, MS 311 and MS 391, width across flats 19-16 for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.

  Versions

  • Multi function tool, size across flats 19 - 16
    Note and compare

• • 

    Laser 2-in-1

    Felling direction indicator and cutting guide in one. For cutting short pieces of wood without complicated measuring, can be used as a felling direction indicator to check the cuts and felling direction, demonstration video on DVD. Choose the holder suitable for your chain saw.

  Versions

  • Laser 2-in-1
    Note and compare

• • 

    Holder 1143 for STIHL Laser 2-in-1

    MS 231, MS 241, MS 251, all design variants except VW

  Versions

  • Holder 1143 for STIHL Laser 2-in-1
    Note and compare