Submit Arrow Right
Direct product selection: Petrol chainsaws for property maintenance

MS 194 C-E

Lightweight 1,4kW-chainsaw with 2-MIX engine and ErgoStart

General

MS 194 C-E
MS 194 C-E
MS 194 C-E

Lightweight STIHL chainsaw for tree maintenance and lopping work, as well as cutting firewood to length. STIHL ErgoStart and the fuel pump enable easy and effortless starting. With a 3/8" PM3 saw chain. Improved cutting performance with reduced fuel consumption due to the new 2-MIX engine

Versions



Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Technical specifications

MS 194 C-E

Technical specifications

Technical specifications Value
Displacement 31,76 cm³
Power output 1,4/1,9 kW/PS
Weight 1) 3,6 kg
Power-to-weight ratio 2,6 kg/kW
Saw chain pitch 3/8"P
Sound pressure level 2) 101 dB(A)
Sound power level 3) 114 dB(A)
Vibration level left/right 4) 3,6/3,6 m/s²

1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 (dB (A))
3) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
4) K-factor according to DIR 2006/42/EC = 2m / s ²

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

MS 194 C-E

Standard equipment

  • STIHL ANTI-VIBRATION SYSTEM Zoom
    STIHL ANTI-VIBRATION SYSTEM

    FOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.

  • CAPTIVE NUTS Zoom
    CAPTIVE NUTS

    PROTECTION AGAINST LOSS The nuts are attached to the sprocket cover in a captive manner. This makes it impossible for the nuts to fall off and get lost when the cover is removed.

  • COMPENSATOR Zoom
    COMPENSATOR

    REDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.

  • STIHL 2-MIX ENGINE Zoom
    STIHL 2-MIX ENGINE

    HIGHLY POWER-EFFICIENT. With the STIHL 2-MIX engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.

  • STIHL ERGOSTART Zoom
    STIHL ERGOSTART

    EFFORTLESS STARTING. STIHL ErgoStart saves you energy when starting your power tools. A smooth and even pull on the starter cord is all that’s needed. The required speed on the starter cord is significantly reduced, and the engine starts quickly and reliably even with a slow pull. An additional spring between the crankshaft and the starter cord roll makes this easier.

  • STIHL FOUR-CHANNEL TECHNOLOGY Zoom
    STIHL FOUR-CHANNEL TECHNOLOGY

    FOR LOWER FUEL CONSUMPTION AND HIGH PERFORMANCE. Thanks to STIHL four-channel technology, you can work with your power tool with very low fuel consumption and high performance. The four overflow channels guide the fuel-and-air mixture into the cylinder in a targeted and more compressed manner, which optimally burns the fuel and significantly increases the performance of the engine.

  • SIDE-MOUNTED CHAIN TENSIONING Zoom
    SIDE-MOUNTED CHAIN TENSIONING

    FOR SIMPLE AND SECURE RE-TENSIONING. Side-mounted chain tensioning allows for protected, easy and quick chain tensioning and replacement. The tensioning screw is inserted laterally through the sprocket cover.

  • SERVICING-FRIENDLY AIR FILTER SYSTEM Zoom
    SERVICING-FRIENDLY AIR FILTER SYSTEM

    MAKES CLEANING EASIER. The shroud has been practically designed to be opened with just one movement and without tools. This makes it easier to clean your chainsaw’s air filter.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    STIHL chainsaws and pole pruners with manual fuel pumps allow improved starting with a reduced number of starting pulls. Pressing the primer fills the carburettor control chamber with fuel. This ensures that there is sufficient fuel present to create an ignitable air-fuel mix on starting, requiring significantly fewer starting pulls.

  • Tool free fuel caps Zoom
    Tool free fuel caps

    Special caps to open and close the tank cap quickly, easily and without tools.

  • Stop button function Zoom
    Stop button function

    After the machine is turned off, the control lever immediately moves back into the operating position. This allows a warm machine to be restarted immediately.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

MS 194 C-E

Accessories

    • Chainsaw bag Zoom
      Chainsaw bag

      For tidy storage and transport of chainsaws with bar lengths up to 45 cm.

    Versions

    • Chainsaw case Zoom
      Chainsaw case

      For storage and transport of all battery-powered and petrol chainsaws with bar lengths up to 45 cm (not suitable for electric chainsaws and petrol chainsaws MS 441 C-M, MS 461, MS 661 C-M and MS 880).

    Versions

    • Scabbard up to 40 cm bar length Zoom
      Scabbard up to 40 cm bar length

      Sturdy chain guard for the safe transport of your chainsaw. Protects chain and users. Suitable for all STIHL chainsaws with bar lengths up to 40cm / 16".

    Versions

    • Scabbard for MS 150, 35 cm bar length Zoom
      Scabbard for MS 150, 35 cm bar length

      Robust scabbard for the safe transport and storage of your chainsaw.

    Versions

    • Scabbard for MS 150, 35 cm bar length

    • Multi-function tool Zoom
      Multi-function tool

      Practical, multi-function quality tool in a sturdy plastic case. 3.5 mm flat-blade screwdriver for carburettor adjustment and cleaning grooves, Torx® TX 27 screwdriver, nylon pouch with belt loop. Width across flats 19-13 for MS 271, MS 291, MS 311 and MS 391, width across flats 19-16 for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.

    Versions

    • Multi function tool, size across flats 19 - 16

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.