Submit Arrow Right
Direct product selection: Petrol chainsaws for forestry

MS 462 C-M VW

MS 462 C-M VW petrol-driven chainsaw: for maximum sawing performance during winter use in the forest

General

MS 462 C-M VW
MS 462 C-M VW

Weight-optimised high-power saw with handle and heated carburettor With economical 2-MIX engine. STIHL M-Tronic guarantees optimum engine performance at all times, with a single starting position and stop button function for easy starting. Controlled-delivery high-performance oil pump for high pumping capacity, HD2 filter with radial seal, tool-free fuel caps for simple, safe refuelling.

Versions



Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Product versions

  • MS 462 C-M MS 462 C-M petrol-driven chainsaw: for maximum sawing performance when felling and delimbing in forestry

Technical specifications

MS 462 C-M VW

Technical specifications

Technical specifications Value
Displacement 72,2 cm³
Power output 4,4/6 kW/PS
Weight 1) 6,1 kg
Power-to-weight ratio 1,4 kg/kW
Sound pressure level 2) 108 dB(A)
Vibration level left/right 3) 4,8/3,6 m/s²
Saw chain pitch 3/8"
STIHL Oilomatic saw chain type RS
Sound power level 4) 119 dB(A)

1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 (dB (A))
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) K-factor according to DIR 2006/42/EC = 2.5 dB (A)

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

MS 462 C-M VW

Standard equipment

  • STIHL M-Tronic (FT) Zoom
    STIHL M-Tronic (FT)

    For a cold start, the STIHL M-Tronic only needs one start position on the combi-lever. After starting, you can immediately power up to full speed. The amount of fuel required is precisely calculated by the system and supplied as needed. Otherwise, start in position I as usual.

  • STIHL ElastoStart Zoom
    STIHL ElastoStart

    Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.

  • STIHL 2-MIX ENGINE Zoom
    STIHL 2-MIX ENGINE

    HIGHLY POWER-EFFICIENT. With the STIHL 2-MIX engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.

  • ELECTRICALLY HEATED HANDLES Zoom
    ELECTRICALLY HEATED HANDLES

    FOR USE IN FROSTY TEMPERATURES. The electric heating in the handle and rear handle can be easily switched on as required. This means that your hands stay warm even in cold weather and you keep a secure grip on your power tool. The handle heating system consists of maintenance-free and wear-free heating foils.

  • HD2 filter with radial seal Zoom
    HD2 filter with radial seal

    The new HD2 air filter, made from PET material and featuring a radial seal, prevents the intake of fine dust particles. The hermetic seal increases the service life of the engine and reduces wear.

  • CARBURETTOR HEATING Zoom
    CARBURETTOR HEATING

    WORK WITHOUT INTERRUPTION, EVEN IN FROST. Thanks to electric carburettor heating, you can work without interruption even in frosty weather conditions. You do not need to keep an eye on the temperature, as the heating element activates automatically at critical temperatures thanks to temperature-dependent switch-on and switch-off controls. The heater then heats up the carburettor to prevent freezing.

  • SIDE-MOUNTED CHAIN TENSIONING Zoom
    SIDE-MOUNTED CHAIN TENSIONING

    FOR SIMPLE AND SECURE RE-TENSIONING. Side-mounted chain tensioning allows for protected, easy and quick chain tensioning and replacement. The tensioning screw is inserted laterally through the sprocket cover.

  • STIHL Ematic with new oil pump system Zoom
    STIHL Ematic with new oil pump system

    The new oil pump system allows a higher volume of oil to be delivered. This is especially useful in dusty conditions or when using a long guide bar.

  • COMPENSATOR Zoom
    COMPENSATOR

    REDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.

  • MANUAL DECOMPRESSION Zoom
    MANUAL DECOMPRESSION

    EFFORTLESS START-UP. The decompression valve makes it easier to start your power tool. When starting, you can allow some of the compressed mixture to escape from the cylinder by opening the valve. This protects the start-up system and reduces the amount of force required on the starter cord.

  • STIHL ANTI-VIBRATION SYSTEM Zoom
    STIHL ANTI-VIBRATION SYSTEM

    FOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.

  • OPTIMISED SPROCKET COVER Zoom
    OPTIMISED SPROCKET COVER

    SAVES YOUR ENERGY. The optimised sprocket cover is narrower and flatter than the previous model. This improvement enables effortless delimbing and excellent chip removal. It has integrated slide rails and a guide edge, making it easier to guide the power tool along the trunk.

  • GOOD POWER-TO-WEIGHT RATIO Zoom
    GOOD POWER-TO-WEIGHT RATIO

    PERCEPTIBLY LOW WEIGHT WITH HIGH PERFORMANCE. Thanks to modern techniques, the use of lightweight materials and compact design, this power tool has a very good power-to-weight ratio. This means that you can work particularly effortlessly, without having to forgo high performance.

  • COMBI LEVER WITH STOP FUNCTION Zoom
    COMBI LEVER WITH STOP FUNCTION

    SIMPLIFIED OPERATION. Only one start position is required on the combi lever. Thanks to the stop function, once the machine is turned off the control lever immediately moves back into the operating position. This allows a warm machine to be restarted immediately.

  • CAPTIVE NUTS Zoom
    CAPTIVE NUTS

    PROTECTION AGAINST LOSS The nuts are attached to the sprocket cover in a captive manner. This makes it impossible for the nuts to fall off and get lost when the cover is removed.

  • Tool free fuel caps Zoom
    Tool free fuel caps

    Special caps to open and close the tank cap quickly, easily and without tools.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

MS 462 C-M VW

Accessories

    • Chainsaw bag Zoom
      Chainsaw bag

      For tidy storage and transport of chainsaws with bar lengths up to 45 cm.

    Versions

    • Combination socket tool Zoom
      Combination socket tool

      For tensioning the chain and changing the chain, bar and spark plug. Width across flats: 19 (for MS 261 up), 19-13 (for MS 271, MS, 291, MS 311, MS 391), 19–16 (for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241, MS 251), 16 and 13 ( for MS 150, MS 201, MS 201 T).

    Versions

    • Multi-function tool Zoom
      Multi-function tool

      Practical, multi-function quality tool in a sturdy plastic case. 3.5 mm flat-blade screwdriver for carburettor adjustment and cleaning grooves, Torx® TX 27 screwdriver, nylon pouch with belt loop. Width across flats 19-13 for MS 271, MS 291, MS 311 and MS 391, width across flats 19-16 for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.

    Versions

    • Multi function tool, size across flats 19 - 13

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Documents

Owners manuals and safety brochures

Languages Date Link
manual icon de 30.01.2024
Download PDF 2,6 MB
Download PDF 2,6 MB