M-Tronic for optimum engine performance at all times and easy starting thanks to a single start position. Economical 2-MIX engine, long-life air filter system with HD2 filter for an excellent filtering effect, standard- fitted with a Duro 3 carbide saw chain which is especially good for cutting dirty wood.
Versions
-
MS 362 C-M with Rapid Duro 3 saw chain, Bar length 40 cm
Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.
Technical specifications
Technical specifications |
Value |
Displacement
|
59
cm³
|
Power output
|
3,5/4,8
kW/bhp
|
Weight
1)
|
5,6
kg
|
Power-to-weight ratio
|
1,6
kg/kW
|
Sound pressure level
2)
|
106
dB(A)
|
Sound power level
3)
|
117
dB(A)
|
Vibration level left/right
4)
|
3,5/3,5
m/s²
|
Saw chain pitch
|
3/8"
|
STIHL Oilomatic saw chain type
|
Rapid Duro (RD3)
|
1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 (dB (A))
3) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
4) K-factor according to DIR 2006/42/EC = 2m / s ²
Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.
Standard equipment
-
STIHL M-Tronic (FT)
For a cold start, the STIHL M-Tronic only needs one start position on the combi-lever. After starting, you can immediately power up to full speed. The amount of fuel required is precisely calculated by the system and supplied as needed. Otherwise, start in position I as usual.
-
STIHL ElastoStart
Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.
-
STIHL 2-MIX engine
The two-stroke engine with STIHL 2-MIX technology saves up to 20 % of fuel and reduces emissions by up to 70 % compared to STIHL 2-stroke engines of the same performance class without 2-MIX technology.
-
Carburettor heating (V)
By changing the chain saw from summer to winter operation, the intake air is pre-heated over the engine fins. This ensures that the carburettor does not ice up and you can continue working in freezing temperatures.
-
Controlled-delivery oil pump
Different bar lengths, wood types and sawing techniques require
different amounts of oil. The controlled-delivery oil pump allows
the user to select just the right amount of oil for the job at hand.
-
Side-mounted chain tensioning
Side-mounted chain tensioning makes it easy to tension the chain safely.
-
Pre-separation air filtration system
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
-
HD2 filter
This air filter keeps even the finest dust away from the engine, ensuring a particularly long service life. Thanks to its special material, the filter can easily be cleaned by washing, for example with STIHL Varioclean and warm water.
-
Advanced combustion technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
-
Compensator
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
-
Decompression valve
The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.
-
STIHL anti-vibration system
Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.
-
STIHL Ematic System
Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.
-
Combi lever
As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
-
Captive nuts
When changing the cutting attachment, you will not risk losing the nuts on the sprocket. The MS 261 is the first STIHL chainsaw to be equipped with the captive nuts. A great advantage for all users.
-
Tool free fuel caps
Special caps to open and close the tank cap quickly, easily and without tools.
Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.
Accessories
-
-
Chainsaw case
For storage and transport of all battery-powered and petrol chainsaws with bar lengths up to 45 cm (not suitable for electric chainsaws and petrol chainsaws MS 441 C-M, MS 461, MS 661 C-M and MS 880).
-
-
Chainsaw bag
For tidy storage and transport of chainsaws with bar lengths up to 45 cm.
-
-
Combination socket tool
For tensioning the chain and changing the chain, bar and spark plug. Width across flats: 19 (for MS 261 up), 19-13 (for MS 271, MS, 291, MS 311, MS 391), 19–16 (for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241, MS 251), 16 and 13 ( for MS 150, MS 201, MS 201 T).
Versions
-
Combination socket tool, width across flats 19-13
-
-
Multi-function tool
Practical, multi-function quality tool in a sturdy plastic case. 3.5 mm flat-blade screwdriver for carburettor adjustment and cleaning grooves, Torx® TX 27 screwdriver, nylon pouch with belt loop. Width across flats 19-13 for MS 271, MS 291, MS 311 and MS 391, width across flats 19-16 for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.
Versions
-
Multi function tool, size across flats 19 - 13
Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.