MS 362 C-M VW

Robust and powerful, everyday forestry chainsaw, designed and built for the professional. Ideal for long sawing sessions harvesting wood. The electronic self-tuning engine management system means that the fuel supply is electronically controlled and the machine automatically adapts to operating and ambient conditions, ensuring optimal engine performance. Additional features include heated carburettor and handles, easy-clean HD2 filter, controlled-delivery oil pump and practical features such as a stainless steel muffler, captive nuts on the sprocket cover and monocoque cover with three quick release fasteners. The 2-MIX technology in the innovative STIHL MS 362 C-M VW ensures up to 20% less fuel consumption and up to 50% emissions reduction compared to the same power STIHL two-stroke engines without 2-MIX technology.

Versions

MS 362 C-M VW 3/8", Bar length 45cm

Note and compare
MS 362 C-M VW 3/8", Bar length 37cm

Note and compare
MS 362 C-M VW 3/8" , Bar length 40cm

Note and compare

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Product versions

MS 362 C-M MS 362 C-M petrol-driven chainsaw: a versatile powerhouse for forestry work

Technical specifications

Technical specifications	Value
Displacement	59 cm³
STIHL Oilomatic saw chain type	Rapid Super (RS)
Power output	3,5/4,8 kW/PS
Weight ¹⁾	5,8 kg
Power-to-weight ratio	1,7 kg/kW
Saw chain pitch	3/8"
Sound pressure level ²⁾	106 dB(A)
Sound power level ³⁾	117 dB(A)
Vibration level left/right ⁴⁾	3,5/3,5 m/s²

1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 (dB (A))
3) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
4) K-factor according to DIR 2006/42/EC = 2m / s ²

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Standard equipment

STIHL M-Tronic (FT)

For a cold start, the STIHL M-Tronic only needs one start position on the combi-lever. After starting, you can immediately power up to full speed. The amount of fuel required is precisely calculated by the system and supplied as needed. Otherwise, start in position I as usual.
STIHL ElastoStart

Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.
STIHL 2-MIX ENGINE

HIGHLY POWER-EFFICIENT. With the STIHL 2-MIX engine, you can reduce exhaust emissions and fuel consumption, and therefore operating costs. This 2-stroke engine is low-maintenance and uses fuel efficiently even at high power levels. Use a mixture of petrol and engine oil as fuel. The STIHL 2-MIX engine complies with the strict EU Stage V emissions directive.
ELECTRICALLY HEATED HANDLES

FOR USE IN FROSTY TEMPERATURES. The electric heating in the handle and rear handle can be easily switched on as required. This means that your hands stay warm even in cold weather and you keep a secure grip on your power tool. The handle heating system consists of maintenance-free and wear-free heating foils.
CARBURETTOR PRE-HEATING

FOR RELIABLE OPERATION EVEN IN WINTER. Thanks to carburettor preheating, you can work reliably with your chainsaw even in winter. You can change the operation from summer to winter mode in just one simple step. In the winter setting, pre-heated intake air flows around the carburettor, preventing it from icing up.
CONTROLLED-DELIVERY OIL PUMP

OIL CONSUMPTION BASED ON NEED. The controlled-delivery oil pump reduces your chainsaw’s oil consumption by up to 50%. To use it, simply select the E position. For very long cutting attachments or very dry wood, an additional oil volume can be set by the user.
CARBURETTOR HEATING

WORK WITHOUT INTERRUPTION, EVEN IN FROST. Thanks to electric carburettor heating, you can work without interruption even in frosty weather conditions. You do not need to keep an eye on the temperature, as the heating element activates automatically at critical temperatures thanks to temperature-dependent switch-on and switch-off controls. The heater then heats up the carburettor to prevent freezing.
SIDE-MOUNTED CHAIN TENSIONING

FOR SIMPLE AND SECURE RE-TENSIONING. Side-mounted chain tensioning allows for protected, easy and quick chain tensioning and replacement. The tensioning screw is inserted laterally through the sprocket cover.
LONG-LIFE AIR FILTER SYSTEM FOR CHAINSAWS

EXTENDED FILTER SERVICE LIFE. Pre-separation routing removes coarse, larger particles from the airstream before they can reach the actual filter. The HD2 filter keeps even fine dust away from the engine, ensuring a long engine service life, long cleaning intervals and easy maintenance of your chainsaw. When we refer to a long-life air filter system in chainsaws, this exclusively describes models that have pre-separation routing and an HD2 filter. With this system, you benefit from a significantly longer filter service life compared to conventional air filter systems.
HD2-FILTER

INCREASES SERVICE LIFE. The HD2 filter protects your power tool’s engine against even the finest dust, ensuring a longer service life and reduced wear. The filter made from PET material has up to 70% finer pores than fleece and polyamide filters, and is also oil- and water-repellent. This also makes it easier to clean the filter. When needed, the filter cartridge can be easily replaced without tools.
STIHL FOUR-CHANNEL TECHNOLOGY

FOR LOWER FUEL CONSUMPTION AND HIGH PERFORMANCE. Thanks to STIHL four-channel technology, you can work with your power tool with very low fuel consumption and high performance. The four overflow channels guide the fuel-and-air mixture into the cylinder in a targeted and more compressed manner, which optimally burns the fuel and significantly increases the performance of the engine.
COMPENSATOR

REDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.
MANUAL DECOMPRESSION

EFFORTLESS START-UP. The decompression valve makes it easier to start your power tool. When starting, you can allow some of the compressed mixture to escape from the cylinder by opening the valve. This protects the start-up system and reduces the amount of force required on the starter cord.
STIHL ANTI-VIBRATION SYSTEM

FOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.
STIHL Ematic System

Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.
Combi lever

As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
CAPTIVE NUTS

PROTECTION AGAINST LOSS The nuts are attached to the sprocket cover in a captive manner. This makes it impossible for the nuts to fall off and get lost when the cover is removed.
Tool free fuel caps

Special caps to open and close the tank cap quickly, easily and without tools.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

- Chainsaw case
  
  For storage and transport of all battery-powered and petrol chainsaws with bar lengths up to 45 cm (not suitable for electric chainsaws and petrol chainsaws MS 441 C-M, MS 461, MS 661 C-M and MS 880).
Versions
- Chainsaw case
  Note and compare
- Chainsaw bag
  
  For tidy storage and transport of chainsaws with bar lengths up to 45 cm.
Versions
- Carry bag for chainsaws
  Note and compare
- Combination socket tool
  
  For tensioning the chain and changing the chain, bar and spark plug. Width across flats: 19 (for MS 261 up), 19-13 (for MS 271, MS, 291, MS 311, MS 391), 19–16 (for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241, MS 251), 16 and 13 ( for MS 150, MS 201, MS 201 T).
Versions
- Combination socket tool, width across flats 19-13
  Note and compare
- Multi-function tool
  
  Practical, multi-function quality tool in a sturdy plastic case. 3.5 mm flat-blade screwdriver for carburettor adjustment and cleaning grooves, Torx® TX 27 screwdriver, nylon pouch with belt loop. Width across flats 19-13 for MS 271, MS 291, MS 311 and MS 391, width across flats 19-16 for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.
Versions
- Multi function tool, size across flats 19 - 13

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Owners manuals and safety brochures

Languages	Date	Link
de	10.06.2021	Download PDF 2,5 MB Download PDF 2,5 MB

MS 362 petrol chainsaw: a versatile powerhouse

General

Versions

Product versions

Technical specifications

Technical specifications

Features

Standard equipment

STIHL M-Tronic (FT)

STIHL ElastoStart

STIHL 2-MIX ENGINE

ELECTRICALLY HEATED HANDLES

CARBURETTOR PRE-HEATING

CONTROLLED-DELIVERY OIL PUMP

CARBURETTOR HEATING

SIDE-MOUNTED CHAIN TENSIONING

LONG-LIFE AIR FILTER SYSTEM FOR CHAINSAWS

HD2-FILTER

STIHL FOUR-CHANNEL TECHNOLOGY

COMPENSATOR

MANUAL DECOMPRESSION

STIHL ANTI-VIBRATION SYSTEM

STIHL Ematic System

Combi lever

CAPTIVE NUTS

Tool free fuel caps

Accessories

Accessories

Chainsaw case

Versions

Chainsaw bag

Versions

Combination socket tool

Versions

Multi-function tool

Versions

Documents

Owners manuals and safety brochures