MS 390

• 

  Carburettor heating (V)

  By changing the chain saw from summer to winter operation, the intake air is pre-heated over the engine fins. This ensures that the carburettor does not ice up and you can continue working in freezing temperatures.

• 

  Controlled-delivery oil pump

  Different bar lengths, wood types and sawing techniques require different amounts of oil. The controlled-delivery oil pump allows the user to select just the right amount of oil for the job at hand.

• 

  Side-mounted chain tensioning

  Side-mounted chain tensioning makes it easy to tension the chain safely.

• 

  Compensator

  This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

• 

  Decompression valve

  The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.

• 

  STIHL anti-vibration system

  Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

• 

  STIHL Ematic System

  Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

• 

  Single-lever master control

  All important functions such as start, choke, throttle and stop are operated via a single lever.

• 

  Tool free fuel caps

  Special caps to open and close the tank cap quickly, easily and without tools.

Retrofitted equipment

• 

  STIHL ElastoStart

  Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.

• • 

    Chainsaw bag

    For tidy storage and transport of chainsaws with bar lengths up to 45 cm.

  Versions

  • Carry bag for chainsaws
    Note and compare

• • 

    Combination socket tool

    For tensioning the chain and changing the chain, bar and spark plug. Width across flats: 19 (for MS 261 up), 19-13 (for MS 271, MS, 291, MS 311, MS 391), 19–16 (for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241, MS 251), 16 and 13 ( for MS 150, MS 201, MS 201 T).

  Versions

  • Combination socket tool, width across flats 19-13
    Note and compare

• • 

    Multi-function tool

    Practical, multi-function quality tool in a sturdy plastic case. 3.5 mm flat-blade screwdriver for carburettor adjustment and cleaning grooves, Torx® TX 27 screwdriver, nylon pouch with belt loop. Width across flats 19-13 for MS 271, MS 291, MS 311 and MS 391, width across flats 19-16 for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.

  Versions

  • Multi function tool, size across flats 19 - 13
    Note and compare