MS 150 C-E, Carving

Additional images

STIHL’s lightest carving saw. Effortless starting thanks to the manual fuel pump and STIHL ErgoStart, economical 2-MIX engine, equipped with the STIHL carving guide bar and 1/4" PM3 saw chain for precise and safe working.

Versions

MS 150 C-E, Carving, PM3, Bar length 30cm

Note and compare

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Technical specifications

Displacement	23,6 cm³
Power output	1/1,3 kW/bhp
Weight ¹⁾	2,8 kg
Power-to-weight ratio	2,8 kg/kW
Sound pressure level ²⁾	97 dB(A)
Sound power level ²⁾	110 dB(A)
Sound power level ²⁾	108 dB(A)
Vibration level left/right ³⁾	4,9/4,9 m/s²
Saw chain pitch	1/4"P
STIHL Oilomatic saw chain type	PM3

1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Standard equipment

STIHL ErgoStart (E)

A spring between the starter cord reel and crankshaft relieves the strain when starting, meaning that excessive pulling on the cord is no longer needed. The result is a convenient starting procedure with practically.
STIHL 2-MIX engine

The two-stroke engine with STIHL 2-MIX technology saves up to 20 % of fuel and reduces emissions by up to 70 % compared to STIHL 2-stroke engines of the same performance class without 2-MIX technology.
Service-friendly air filter system

The carburetor can be accessed without tools, so you can clean the air filter in a single step.
Side-mounted chain tensioning

Side-mounted chain tensioning makes it easy to tension the chain safely.
Advanced combustion technology

Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
Compensator

This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
Manual fuel pump (Purger)

STIHL chainsaws and pole pruners with manual fuel pumps allow improved starting with a reduced number of starting pulls. Pressing the primer fills the carburettor control chamber with fuel. This ensures that there is sufficient fuel present to create an ignitable air-fuel mix on starting, requiring significantly fewer starting pulls.
STIHL anti-vibration system

Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.
STIHL Ematic System

Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.
Tool free fuel caps

Special caps to open and close the tank cap quickly, easily and without tools.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

- Scabbard for MS 150, 25 cm bar length
  
  Robust scabbard for the safe transport of your chainsaw. For the MS 150 C-E.
Versions
- Scabbard for MS 150, 25 cm bar length
  Note and compare
- Combination socket tool
  
  For tensioning the chain and changing the chain, bar and spark plug. Width across flats: 19 (for MS 261 up), 19-13 (for MS 271, MS, 291, MS 311, MS 391), 19–16 (for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241, MS 251), 16 and 13 ( for MS 150, MS 201, MS 201 T).
Versions
- Combination socket tool, width across flats 16 and 13
  Note and compare

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Owners manuals and safety brochures

fr / it / de	Download	PDF 5,3 MB
de	Download	PDF 2,2 MB

Extremely light 1.0 kW carving chainsaw