Direct product selection: Petrol brushcutters for trimming grass

FS 40

Modern, convenient and very easy to start. Ideal for around-the-garden trimming tasks.

General

FS 40
Zoom
Additional images

With simplified starting system, for mowing smaller areas of grass. Multifunction handle, round handle, 2-MIX engine.

Versions



Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Technical specifications

FS 40

Technical specifications

Displacement 27,2 cm³
Power output 0,7/1 kW/PS
Weight 1) 4,4 kg
Sound pressure level with plastic tool 2) 94 dB(A)
Sound power level 2) 107 dB(A)
Vibration level, left/right with plastic tool 3) 7/6,4 m/s²
Total length 4) 145 cm
Cutting tool AutoCut mowing head C 5-2

1) Weight excluding fuel, cutting tool and guard
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

FS 40

Standard equipment

  • STIHL 2-MIX-Engine Zoom
    STIHL 2-MIX-Engine

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • Multi-function control handle Zoom
    Multi-function control handle

    Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.

  • Simplified starting system Zoom
    Simplified starting system

    Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

  • Goggles Zoom
    Goggles

    It is important to protect your eyes from flying particles and harmful UV radiation. Therefore a pair of safety goggles/glasses are supplied with the the machine. Note: Additional face protection must be worn when working with brushcutters.

Retrofitted equipment

  • STIHL ErgoStart (E) Zoom
    STIHL ErgoStart (E)

    STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

  • Basic harness Zoom
    Basic harness

    For use with loop handle machines.

  • Shoulder strap / carrying system Zoom
    Shoulder strap / carrying system

    Using a STIHL shoulder strap or carrying harness with soft padding makes work more comfortable, particularly during lengthy jobs.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Cutting Tools

FS 40

Cutting Tools

    • AutoCut C mowing head (2-line) Zoom
      AutoCut C mowing head (2-line)

      Double lines, for mowing and thinning work. Mowing lines are automatically extended when the mowing head is tapped on the ground. With comfort grip for easy re-loading.

    Versions

    • PolyCut mowing head Zoom
      PolyCut mowing head

      Universal cutting tool for trimming and working on large areas. With three moving plastic knives.

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

FS 40

Accessories

    • Line pieces for DuroCut mowing head Zoom
      Line pieces for DuroCut mowing head

      Replacement line pieces for DuroCut mowing head.

    Versions

    • Set of plastic blades Zoom
      Set of plastic blades

      For PolyCut, twelve plastic blades.

    Versions

    • Protective cover for brushcutters Zoom
      Protective cover for brushcutters

      Perfect transport protection for the engine housing of brushcutters and clearing saws. For FS 38 - FS 450.

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Documents

Owners manuals and safety brochures

STIHL FS 300, 350, 400, 450, 480 (D) Download PDF, 1,9 MB
STIHL FS 40, 50 (D) Download PDF, 1,3 MB
STIHL FS 40, 50 (D, F, I, NL) Download PDF, 4,3 MB
STIHL FS 400, 450 (D, F, I, NL) Download PDF, 6,1 MB

Notes:

  • STIHL online owner’s manuals are usually for the latest versions of the machine. Your product may be a slightly older production model but the manual will still be appropriate for the relevant model number
  • The languages ​​contained in the document are also displayed in brackets, for example (GB) = English

Cookies on the STIHL website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on our STIHL website. If you would like to learn more about the usage of cookies please click here.

OK