Submit Arrow Right
Direct product selection: Petrol brushcutters for landscape maintenance

FS 94 C-E

Comfortable 0.9kW brushcutter with bike handle, ErgoStart and ECOSPEED

General

FS 94 C-E

Lightest brushcutter in this segment. STIHL 1-point anti-vibration system, ErgoStart, bike handle, control handle with ECOSPEED partially loaded function, STIHL 2-MIX engine, straight shaft and double shoulder harness.

Versions



Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Product versions

  • FS 94 RC-E Comfortable 0.9kW brushcutter with loop handle, ErgoStart and ECOSPEED

Technical specifications

FS 94 C-E

Technical specifications

Technical specifications Value
Displacement 24,1 cm³
Power output 0,9/1,2 kW/bhp
Weight 1) 4,9 kg
Sound pressure level with plastic tool 2) 94 dB(A)
Sound pressure level with metal tool 2) 93 dB(A)
Sound power level with metal tool 2) 107 dB(A)
Sound power level 2) 107 dB(A)
Vibration level, left/right with plastic tool 3) 4,7/4 m/s²
Vibration level, left/right with metal tool 3) 4,3/3,5 m/s²
Total length 4) 178 cm
Cutting tool Grass cutting blade 230-2

1) Weight excluding fuel, cutting tool and guard
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

FS 94 C-E

Standard equipment

  • STIHL ECOSPEED Zoom
    STIHL ECOSPEED

    STIHL ECOSPEED enables the user to control the brushcutter engine speed individually on the operating handle.

  • STIHL ErgoStart (E) Zoom
    STIHL ErgoStart (E)

    STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

  • STIHL 2-MIX-Engine Zoom
    STIHL 2-MIX-Engine

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • Bike handle Zoom
    Bike handle

    When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

  • Anti-vibration system Zoom
    Anti-vibration system

    Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

  • ADVANCE Universal Harness Zoom
    ADVANCE Universal Harness

    Soft padding makes work more comfortable during longer jobs.

  • Shoulder strap / carrying system Zoom
    Shoulder strap / carrying system

    Using a STIHL shoulder strap or carrying harness with soft padding makes work more comfortable, particularly during lengthy jobs.

  • Simplified starting system Zoom
    Simplified starting system

    Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

  • Large fuel tank Zoom
    Large fuel tank

    The transparent fuel tank ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration)

  • Goggles Zoom
    Goggles

    It is important to protect your eyes from flying particles and harmful UV radiation. Therefore a pair of safety goggles/glasses are supplied with the the machine. Note: Additional face protection must be worn when working with brushcutters.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Cutting Tools

FS 94 C-E

Cutting Tools

    • TrimCut mowing head C 32-2 Zoom
      TrimCut mowing head C 32-2

      Double line, for mowing and thinning work. Mowing lines are extended by hand.

    Versions

    • SuperCut mowing head (2 line) Zoom
      SuperCut mowing head (2 line)

      Double line, for mowing and thinning work. Mowing lines are automatically adjusted for optimal cutting length.

    Versions

    • Mowing line SuperCut 20-2

    • GrassCut Grass cutting blade (4 blades) Zoom
      GrassCut Grass cutting blade (4 blades)

      Made of steel. With four cutters for mowing thick, dry grass and reeds

    Versions

    • Grass cutting blade 230 mm (4 blade)

    • GrassCut Grass cutting blade (8 teeth) Zoom
      GrassCut Grass cutting blade (8 teeth)

      Made of steel with 8 teeth for mowing thick, dry grass and reeds.

    Versions

    • GrassCut Grass cutting blade (8 teeth) Zoom
      GrassCut Grass cutting blade (8 teeth)

      Made of steel with 8 teeth for mowing thick, dry grass and reeds.

    Versions

    • Grass cutting blade 230 mm (8 teeth)

    • SuperCut mowing head (2 line) Zoom
      SuperCut mowing head (2 line)

      Double line, for mowing and thinning work. Mowing lines are automatically adjusted for optimal cutting length.

    Versions

    • GrassCut Grass cutting blade 250-44 Zoom
      GrassCut Grass cutting blade 250-44

      Low-throw, steel grass-cutting blade with 44 teeth (diameter: 250 mm). Clippings are not scattered, and the risk of stones flying up as debris is low. Ideal for mowing tough, dry grass and stubborn weeds. Suitable for reeds and bushes. Use only with the universal guard.

    Versions

    • GrassCut cutting blade (40 teeth) Zoom
      GrassCut cutting blade (40 teeth)

      Grass cutting blade with forty teeth. For mowing tough grass.

    Versions

    • GrassCut Grass cutting blade 250-44 Zoom
      GrassCut Grass cutting blade 250-44

      Low-throw, steel grass-cutting blade with 44 teeth (diameter: 250 mm). Clippings are not scattered, and the risk of stones flying up as debris is low. Ideal for mowing tough, dry grass and stubborn weeds. Suitable for reeds and bushes. Use only with the universal guard.

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

FS 94 C-E

Accessories

    • ADVANCE PLUS forestry harness Zoom
      ADVANCE PLUS forestry harness

      Ergonomically designed harness offering great freedom of movement thanks to the freely suspended leg protection. Very light and with comfort carry ring for quickly attaching and removing the clearing saw. For FS 310 - FS 560.

    Versions

    • ADVANCE PLUS universal harness Zoom
      ADVANCE PLUS universal harness

      With quick release system for fast connection and disconnection of brushcutters. Suitable for FS 50 - FS 560

    Versions

    • Line pieces for DuroCut mowing head Zoom
      Line pieces for DuroCut mowing head

      Replacement line pieces for DuroCut mowing head.

    Versions

    • Plastic blades for PolyCut 6-3, 7-3, 20-3, 41-3 Zoom
      Plastic blades for PolyCut 6-3, 7-3, 20-3, 41-3

      For PolyCut, twelve plastic blades.

    Versions

    • Protective cover for brushcutters Zoom
      Protective cover for brushcutters

      Perfect transport protection for the engine housing of brushcutters and clearing saws. For FS 38 - FS 450.

    Versions

    • ADVANCE X-TREEm forestry harness Zoom
      ADVANCE X-TREEm forestry harness

      Offering outstanding ergonomic design, specially developed for long periods of forestry work using circular saws. Highly comfortable to wear due to the length-adjustable back section and infinitely variable load distribution between the shoulders and hips, for FS 89 – FS 560, and FSA 90.

    Versions

    • Hip pad Zoom
      Hip pad

      For fitting to ADVANCE PLUS harness without hooks.

    Versions

    • Hip pad

    • ADVANCE universal harness, fluorescent orange Zoom
      ADVANCE universal harness, fluorescent orange

      High visibility. Perfectly complements protective clothing when mowing in hazardous areas, with a comfort carry ring for quickly attaching and removing the clearing saw, for FS 50 – FS 560 and FSA 90.

    Versions

    • ADVANCE universal harness, fluorescent orange

    • Chest belt Zoom
      Chest belt

      Ensures the shoulder straps are securely positioned. For BR 200, BR 350, BR 430, BR 450, BR 500 and BR 600.

    Versions

    • ADVANCE forestry harness Zoom
      ADVANCE forestry harness

      Freely suspended leg protection provides excellent freedom of movement. Extremely ergonomic and comfortable for forestry use with circular saw blades. Very light. Tool bag also available. Suitable for FS 100 - FS 550.

    Versions

    • ADVANCE universal harness Zoom
      ADVANCE universal harness

      Extremely ergonomic, comfortable and light. For strength-saving mowing and shredding. Chest belt and tool bag also available. Suitable for FS 50 - FS 550.

    Versions

    • Tool bag Zoom
      Tool bag

      A practical way of transporting tools. Two compartments. Easily attached to the universal or forestry harness.

    Versions

    • Upgrade Kit GrassCut 250-32
      Upgrade Kit GrassCut 250-32

      For converting clearing saws that have a nylon mowing head to the GrassCut 250-32 low-spin grass-cutting blade, including all attachments and transport guard. Consists of: 1 × GrassCut 250-32 1 × metal tool transport guard 1 × rider plate 1 × thrust washer 1 × collar nut For FSA 130, FSA 135, FS 89, FS 91, FS 94, FS 111, FS 131, FS 240, FR 131 T, FR 410, FR 460 and FR-KM.

    Versions

    • Protective cover for brushcutters Zoom
      Protective cover for brushcutters

      Perfect transport protection for the engine housing of brushcutters and clearing saws. For FS 38 - FS 450.

    Versions

    • Universal guard Zoom
      Universal guard

      Excellent protection against flying cuttings or stones. With or without an apron for mowing heads.

    Versions

    • Rotary scissors RG Zoom
      Rotary scissors RG

      Tool attachment for brushcutters. For effective removal of weds and grass from various surfaces such as gravel and paved areas. Enables low-spin mowing, for example along roads and around traffic islands. Complete functionality in the attachment gearbox. Powerful cut, tends not to become blocked with cuttings, easy and quick blade change. Fits: FS 91, FS 94, FS 111, FS 131, FSA 130.

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Documents

Owners manuals and safety brochures

Languages Date Link
manual icon de 19.04.2018
Download PDF 1,1 MB
Download PDF 1,1 MB