Direct product selection: Petrol brushcutters for landscape maintenance

FS 240 C-E

Versatile 1.7kW petrol brushcutter with ErgoStart (E) and bike handle

General

FS 240 C-E

Ideal for agricultural and horticultural work. STIHL 1-point anti-vibration system, STIHL ErgoStart, multi-function handle, bike handle, tool-free handle adjustment, 2-MIX engine, straight shaft, solid drive shaft, double shoulder harness.

Versions



Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Technical specifications

FS 240 C-E

Technical specifications

Technical specifications Values
Displacement 37,7 cm³
Power output 1,7/2,3 kW/bhp
Weight 1) 7,1 kg
Sound pressure level with plastic tool 2) 99 dB(A)
Sound power level 2) 111 dB(A)
Sound power level with metal tool 2) 108 dB(A)
Vibration level, left/right with plastic tool 3) 5,2/4,9 m/s²
Sound pressure level with metal tool 2) 98 dB(A)
Vibration level, left/right with metal tool 3) 4,6/4 m/s²
Total length 4) 180 cm
Cutting tool Brush knife 250-3

1) Weight excluding fuel, cutting tool and guard
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

FS 240 C-E

Standard equipment

  • STIHL 2-MIX-Engine Zoom
    STIHL 2-MIX-Engine

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • STIHL ErgoStart (E) Zoom
    STIHL ErgoStart (E)

    STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

  • ADVANCE Universal Harness Zoom
    ADVANCE Universal Harness

    Soft padding makes work more comfortable during longer jobs.

  • Anti-vibration system Zoom
    Anti-vibration system

    Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

  • Multi-function control handle Zoom
    Multi-function control handle

    Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.

  • Bike handle Zoom
    Bike handle

    When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

  • Tool free handle adjustment Zoom
    Tool free handle adjustment

    The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.

  • Simplified starting system Zoom
    Simplified starting system

    Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

  • Compensator Zoom
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • Winter setting slide control Zoom
    Winter setting slide control

    It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing. (similar to illustration)

  • Large fuel tank Zoom
    Large fuel tank

    The transparent fuel tank ensures long working intervals with fewer fuel stops. The level is easily visible from the outside. Easy to refuel through a large, easily accessible tank opening. (similar to illustration)

  • Air filter with long service life Zoom
    Air filter with long service life

    The easily accessible paper filter with a long service life means it can go for long intervals without changing. (similar to illustration)

  • Goggles Zoom
    Goggles

    It is important to protect your eyes from flying particles and harmful UV radiation. Therefore a pair of safety goggles/glasses are supplied with the the machine. Note: Additional face protection must be worn when working with brushcutters.

Retrofitted equipment

  • ADVANCE forestry harness Zoom
    ADVANCE forestry harness

    Great freedom of movement thanks to the freely suspended leg protection. Extremely ergonomic for forestry applications involving circular saw blades. Very light. Tool bag also available.

  • ADVANCE PLUS Universal harness Zoom
    ADVANCE PLUS Universal harness

    With a comfort carry ring for quickly attaching an removing the clearing saw.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Cutting Tools

FS 240 C-E

Cutting Tools

    • Grass cutting blade (40 teeth) Zoom
      Grass cutting blade (40 teeth)

      Grass cutting blade with forty teeth. For mowing tough grass.

    Versions

    • Brush knife Zoom
      Brush knife

      Brush blade made of special steel. Ideal for thinning and clearing tough, matted grass and scrub. Also the pruning of thorn hedges. For use with universal protection.

    Versions

    • Grass cutting blade 250-44 Zoom
      Grass cutting blade 250-44

      Low-throw, steel grass-cutting blade with 44 teeth (diameter: 250 mm). Clippings are not scattered, and the risk of stones flying up as debris is low. Ideal for mowing tough, dry grass and stubborn weeds. Suitable for reeds and bushes. Use only with the universal guard.

    Versions

    • PolyCut mowing head 27-3 Zoom
      PolyCut mowing head 27-3

      Universal cutting tool for trimming and working on large areas. With three mobile plastic blades.

    Versions

    • Grass cutting blade (8 teeth) Zoom
      Grass cutting blade (8 teeth)

      Made of steel with 8 teeth for mowing thick, dry grass and reeds.

    Versions

    • SuperCut mowing head (2 line) Zoom
      SuperCut mowing head (2 line)

      Double line, for mowing and thinning work. Mowing lines are automatically adjusted for optimal cutting length.

    Versions

    • Circular saw blade, scratcher-tooth Zoom
      Circular saw blade, scratcher-tooth

      Special steel tool for mid and high-performance brushcutters. For gnarled bushes and thin tree trunks. Must be used with appropriate stop kit. Only approved for certain bike handle machines.

    Versions

    • Grass cutting blade (40 teeth) Zoom
      Grass cutting blade (40 teeth)

      Grass cutting blade with forty teeth. For mowing tough grass.

    Versions

    • TrimCut mowing head Zoom
      TrimCut mowing head

      Double line, for mowing and thinning work. Mowing lines are extended by hand.

    Versions

    • AutoCut mowing head Zoom
      AutoCut mowing head

      Two lines, for mowing and clearing work. Mowing lines are automatically extended by tapping the mowing head on the ground.

    Versions

    • SuperCut mowing head (2 line) Zoom
      SuperCut mowing head (2 line)

      Double line, for mowing and thinning work. Mowing lines are automatically adjusted for optimal cutting length.

    Versions

    • Grass cutting blade (4 blades) Zoom
      Grass cutting blade (4 blades)

      Made of steel. With four cutters for mowing thick, dry grass and reeds

    Versions

    • Grass cutting blade (8 teeth) Zoom
      Grass cutting blade (8 teeth)

      Made of steel with 8 teeth for mowing thick, dry grass and reeds.

    Versions

    • Grass cutting blade (40 teeth) Zoom
      Grass cutting blade (40 teeth)

      Grass cutting blade with forty teeth. For mowing tough grass.

    Versions

    • Grass cutting blade 250-44 Zoom
      Grass cutting blade 250-44

      Low-throw, steel grass-cutting blade with 44 teeth (diameter: 250 mm). Clippings are not scattered, and the risk of stones flying up as debris is low. Ideal for mowing tough, dry grass and stubborn weeds. Suitable for reeds and bushes. Use only with the universal guard.

    Versions

    • Brush knife Zoom
      Brush knife

      Brush blade made of special steel. Ideal for thinning and clearing tough, matted grass and scrub. Also the pruning of thorn hedges. For use with universal protection.

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

FS 240 C-E

Accessories

    • ADVANCE PLUS forestry harness Zoom
      ADVANCE PLUS forestry harness

      Ergonomically designed harness offering great freedom of movement thanks to the freely suspended leg protection. Very light and with comfort carry ring for quickly attaching and removing the clearing saw. For FS 310 - FS 560.

    Versions

    • ADVANCE PLUS universal harness Zoom
      ADVANCE PLUS universal harness

      With quick release system for fast connection and disconnection of brushcutters. Suitable for FS 50 - FS 560

    Versions

    • Hip pad Zoom
      Hip pad

      For fitting to ADVANCE PLUS harness without hooks.

    Versions

    • ADVANCE X-TREEm forestry harness Zoom
      ADVANCE X-TREEm forestry harness

      Offering outstanding ergonomic design, specially developed for long periods of forestry work using circular saws. Highly comfortable to wear due to the length-adjustable back section and infinitely variable load distribution between the shoulders and hips, for FS 89 – FS 560, and FSA 90.

    Versions

    • Chest belt Zoom
      Chest belt

      Ensures the shoulder straps are securely positioned. For BR 200, BR 350, BR 430, BR 450, BR 500 and BR 600.

    Versions

    • ADVANCE forestry harness Zoom
      ADVANCE forestry harness

      Freely suspended leg protection provides excellent freedom of movement. Extremely ergonomic and comfortable for forestry use with circular saw blades. Very light. Tool bag also available. Suitable for FS 100 - FS 550.

    Versions

    • ADVANCE universal harness Zoom
      ADVANCE universal harness

      Extremely ergonomic, comfortable and light. For strength-saving mowing and shredding. Chest belt and tool bag also available. Suitable for FS 50 - FS 550.

    Versions

    • ADVANCE universal harness, fluorescent orange Zoom
      ADVANCE universal harness, fluorescent orange

      High visibility. Perfectly complements protective clothing when mowing in hazardous areas, with a comfort carry ring for quickly attaching and removing the clearing saw, for FS 50 – FS 560 and FSA 90.

    Versions

    • Tool bag Zoom
      Tool bag

      A practical way of transporting tools. Two compartments. Easily attached to the universal or forestry harness.

    Versions

    • Protective cover for brushcutters Zoom
      Protective cover for brushcutters

      Perfect transport protection for the engine housing of brushcutters and clearing saws. For FS 38 - FS 450.

    Versions

    • Universal guard Zoom
      Universal guard

      Excellent protection against flying cuttings or stones. With or without an apron for mowing heads.

    Versions

    • Stop kit for circular saw blades Zoom
      Stop kit for circular saw blades

      Stop kit and protection for circular saw blades. For accurate cutting with a circular saw blade.

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Documents

Owners manuals and safety brochures

Languages Date Link
de 26.02.2020
Download PDF 2,4 MB
Download PDF 2,4 MB