Submit Arrow Right
Direct product selection: Clearing saws

FS 410 C-EM K

Strong 2 MIX Clearing saw with M-Tronic long version, with circular blade

General

FS 410 C-EM K

For mowing tough grass. STIHL 4-point anti-vibration system, STIHL ErgoStart, multi-function handle, bike handle, tool-free handle adjustment, 2-MIX engine, STIHL M-Tronic. With circular blade.

Versions



Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Product versions

Technical specifications

FS 410 C-EM K

Technical specifications

Technical specifications Value
Displacement 41,6 cm³
Power output 2/2,7 kW/bhp
Weight 1) 8,4 kg
Sound pressure level with metal tool 2) 100 dB(A)
Sound power level with metal tool 2) 112 dB(A)
Vibration level, left/right with metal tool 3) 2,4/2 m/s²
Total length 4) 168 cm
Cutting tool Circular saw blade 225-24

1) Weight excluding fuel, cutting tool and guard
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

FS 410 C-EM K

Standard equipment

  • STIHL M-TRONIC Zoom
    STIHL M-TRONIC

    This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

  • STIHL ErgoStart (FT) Zoom
    STIHL ErgoStart (FT)

    STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.

  • STIHL ElastoStart Zoom
    STIHL ElastoStart

    STIHL ElastoStart is a special starter handle which ensures a smooth starting process without any sudden peak forces. The integral damper smooths the power profile that is generated during starting and makes the starting process a lot easier.

  • STIHL 2-MIX-Engine Zoom
    STIHL 2-MIX-Engine

    2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

  • Multi-function control handle Zoom
    Multi-function control handle

    Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.

  • Multi-function control handle Zoom
    Multi-function control handle

    Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.

  • Bike handle Zoom
    Bike handle

    When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.

  • Anti-vibration system Zoom
    Anti-vibration system

    Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

  • STIHL 4-point anti-vibration system Zoom
    STIHL 4-point anti-vibration system

    In STIHL brushcutters, steel springs act as anti-vibration elements to reduce the transmission of vibrations caused by the motor and rotary cutter. The handles therefore have extremely low vibration and the devices is easy to guide. (similar to illustration)

  • ADVANCE PLUS Universal harness Zoom
    ADVANCE PLUS Universal harness

    With a comfort carry ring for quickly attaching an removing the clearing saw.

  • Tool free handle adjustment Zoom
    Tool free handle adjustment

    The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage, the handle can be rotated by 90°.

  • Compensator Zoom
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • Simplified starting system Zoom
    Simplified starting system

    Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

  • Winter setting slide control Zoom
    Winter setting slide control

    It is quick and easy to switch the setting from winter to summer using the slide control. Using the winter setting will prevent the air filter and carburettor from freezing. (similar to illustration)

  • Locking plug-in bolt Zoom
    Locking plug-in bolt

    Changing the tool is made particularly easy by locking the plug-in bolt in place. (similar to illustration)

  • Goggles Zoom
    Goggles

    It is important to protect your eyes from flying particles and harmful UV radiation. Therefore a pair of safety goggles/glasses are supplied with the the machine. Note: Additional face protection must be worn when working with brushcutters.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Cutting Tools

FS 410 C-EM K

Cutting Tools

    • GrassCut Grass cutting blade (4 blades) Zoom
      GrassCut Grass cutting blade (4 blades)

      Made of steel. With four cutters for mowing thick, dry grass and reeds

    Versions

    • WoodCut Circular saw blade, scratcher-tooth Zoom
      WoodCut Circular saw blade, scratcher-tooth

      Special steel tool for mid and high-performance brushcutters. For gnarled bushes and thin tree trunks. Must be used with appropriate stop kit. Only approved for certain bike handle machines.

    Versions

    • GrassCut Grass cutting blade 250-44 Zoom
      GrassCut Grass cutting blade 250-44

      Low-throw, steel grass-cutting blade with 44 teeth (diameter: 250 mm). Clippings are not scattered, and the risk of stones flying up as debris is low. Ideal for mowing tough, dry grass and stubborn weeds. Suitable for reeds and bushes. Use only with the universal guard.

    Versions

    • GrassCut cutting blade (40 teeth) Zoom
      GrassCut cutting blade (40 teeth)

      Grass cutting blade with forty teeth. For mowing tough grass.

    Versions

    • GrassCut Grass cutting blade (8 teeth) Zoom
      GrassCut Grass cutting blade (8 teeth)

      Made of steel with 8 teeth for mowing thick, dry grass and reeds.

    Versions

    • WoodCut Circular saw blade, chisel-tooth Zoom
      WoodCut Circular saw blade, chisel-tooth

      Special steel tool for mid and high-performance brushcutters. For gnarled bushes and thin tree trunks. Must be used with appropriate stop kit. Only approved for certain bike handle machines.

    Versions

    • WoodCut Circular saw blade, scratcher-tooth Zoom
      WoodCut Circular saw blade, scratcher-tooth

      Special steel tool for mid and high-performance brushcutters. For gnarled bushes and thin tree trunks. Must be used with appropriate stop kit. Only approved for certain bike handle machines.

    Versions

    • AutoCut mowing head 46-2
      AutoCut mowing head 46-2

      Two lines, for mowing and clearing work. Mowing lines are automatically extended by tapping the mowing head on the ground.

    Versions

    • Mowing head SuperCut 40-2 Zoom
      Mowing head SuperCut 40-2

      2-fädiger vollautomatischer Mähkopf zum Ausputzen an Hindernissen wie Mauern, Treppen oder Beeteinfassungen und für Flächenarbeiten. Der Mähfaden wird automatisch auf optimaler Schneidlänge gehalten. Nur mit Spezialmähschutz oder Universalschutz verwenden.

    Versions

    • Mowing line SuperCut 40-2

    • GrassCut Grass cutting blade (4 blades) Zoom
      GrassCut Grass cutting blade (4 blades)

      Made of steel. With four cutters for mowing thick, dry grass and reeds

    Versions

    • Grass cutting blade 230 mm (4 blade)

    • GrassCut Grass cutting blade (8 teeth) Zoom
      GrassCut Grass cutting blade (8 teeth)

      Made of steel with 8 teeth for mowing thick, dry grass and reeds.

    Versions

    • Grass cutting blade 255 mm (8 teeth)

    • GrassCut cutting blade (40 teeth) Zoom
      GrassCut cutting blade (40 teeth)

      Grass cutting blade with forty teeth. For mowing tough grass.

    Versions

    • Grass cutting blade 250 mm (40 teeth)

    • GrassCut Grass cutting blade 250-44 Zoom
      GrassCut Grass cutting blade 250-44

      Low-throw, steel grass-cutting blade with 44 teeth (diameter: 250 mm). Clippings are not scattered, and the risk of stones flying up as debris is low. Ideal for mowing tough, dry grass and stubborn weeds. Suitable for reeds and bushes. Use only with the universal guard.

    Versions

    • BrushCut Brush knife Zoom
      BrushCut Brush knife

      Brush blade made of special steel. Ideal for thinning and clearing tough, matted grass and scrub. Also the pruning of thorn hedges. For use with universal protection.

    Versions

    • 300 mm (3 blade)

    • BrushCut Brush knife 305-2 Zoom
      BrushCut Brush knife 305-2

      Thicket knife with 2-flügeligen knife from steel to the Auslichten and removing of tough, matted grass, undergrowth and to the Zurückschneiden of thorn hedges. Diameter 305 mms. Only with universal protection use.

    Versions

    • Brush knife 305-2

    • GrassCut 250-32, low spin
      GrassCut 250-32, low spin

      Flying stones and gravel often create problems when mowing with clearing saws on traffic islands or in public parks and green spaces. STIHL has the answer: the low-spin 250-32 grass-cutting blade with KWF certificate reduces the safety distance from objects and vehicles to three metres. Thanks to the special tooth shape, the risk of particles flying around is reduced to a minimum. The result is greater safety, maximum working comfort and quicker results. Article 4001 713 3813 for FS 80 , FS 85 , FS 89 , FS 91 , FS 111 , FS 131 , FSA 130, FSA 135, FSA 130 R, FSA 135 R, FS 94 RC-E , FS 94 C-E , FSA 90 R, FSA 90, FS 240 C-E, FR 131 T, FR 480 , FR 480 C-F, FR 410 C-E , FR 460 TC-EM. Article 4001 713 3812 for FS 260 C-E, FS 311, FS 360 C-EM , FS 410 C-EM ,FS 410 C-EM L, FS 410 C-EM K , FS 460 C-EM K , FS 490 C-EM K , FS 490 C-EM K, FS 460 C-EM , FS 460 C-EM L , FS 490 C-EM , FS 490 C-EM L, FS 510 C-EM, FS 560 C-EM.

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

FS 410 C-EM K

Accessories

    • Hip pad Zoom
      Hip pad

      For fitting to ADVANCE PLUS harness without hooks.

    Versions

    • Hip pad

    • ADVANCE X-TREEm forestry harness Zoom
      ADVANCE X-TREEm forestry harness

      Offering outstanding ergonomic design, specially developed for long periods of forestry work using circular saws. Highly comfortable to wear due to the length-adjustable back section and infinitely variable load distribution between the shoulders and hips, for FS 89 – FS 560, and FSA 90.

    Versions

    • ADVANCE forestry harness Zoom
      ADVANCE forestry harness

      Freely suspended leg protection provides excellent freedom of movement. Extremely ergonomic and comfortable for forestry use with circular saw blades. Very light. Tool bag also available. Suitable for FS 100 - FS 550.

    Versions

    • Chest belt Zoom
      Chest belt

      Ensures the shoulder straps are securely positioned. For BR 200, BR 350, BR 430, BR 450, BR 500 and BR 600.

    Versions

    • ADVANCE PLUS forestry harness Zoom
      ADVANCE PLUS forestry harness

      Ergonomically designed harness offering great freedom of movement thanks to the freely suspended leg protection. Very light and with comfort carry ring for quickly attaching and removing the clearing saw. For FS 310 - FS 560.

    Versions

    • ADVANCE universal harness Zoom
      ADVANCE universal harness

      Extremely ergonomic, comfortable and light. For strength-saving mowing and shredding. Chest belt and tool bag also available. Suitable for FS 50 - FS 550.

    Versions

    • ADVANCE PLUS universal harness Zoom
      ADVANCE PLUS universal harness

      With quick release system for fast connection and disconnection of brushcutters. Suitable for FS 50 - FS 560

    Versions

    • ADVANCE universal harness, fluorescent orange Zoom
      ADVANCE universal harness, fluorescent orange

      High visibility. Perfectly complements protective clothing when mowing in hazardous areas, with a comfort carry ring for quickly attaching and removing the clearing saw, for FS 50 – FS 560 and FSA 90.

    Versions

    • ADVANCE universal harness, fluorescent orange

    • Tool bag Zoom
      Tool bag

      A practical way of transporting tools. Two compartments. Easily attached to the universal or forestry harness.

    Versions

    • Protective cover for brushcutters Zoom
      Protective cover for brushcutters

      Perfect transport protection for the engine housing of brushcutters and clearing saws. For FS 38 - FS 450.

    Versions

    • Stop kit for circular saw blades Zoom
      Stop kit for circular saw blades

      Stop kit and protection for circular saw blades. For accurate cutting with a circular saw blade.

    Versions

    • Stop kit for circular saw blades Zoom
      Stop kit for circular saw blades

      Stop kit and protection for circular saw blades. For accurate cutting with a circular saw blade.

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Documents

Owners manuals and safety brochures