Submit Arrow Right
Direct product selection: Backpack brushcutters

FR 460 TC-EFM

With STIHL M-Tronic, STIHL ErgoStart (E), split shaft and STIHL E-Start (F)

General

FR 460 TC-EFM

For mowing jobs that require moving from place to place over large areas that are difficult to access. STIHL anti-vibration system, STIHL ErgoStart, multi-function handle, loop handle, 2-MIX engine, STIHL M-Tronic, stop button, tool bag, split shaft and e-Start (F).

Versions



Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Product versions

  • FR 460 TC-EM Professional backpack brushcutter with self-tuning engine.

Technical specifications

FR 460 TC-EFM

Technical specifications

Technical specifications Value
Displacement 45,6 cm³
Power output 2,2/3 kW/bhp
Weight 1) 11,5 kg
Sound pressure level with metal tool 2) 99 dB(A)
Sound pressure level with plastic tool 2) 100 dB(A)
Sound power level with metal tool 2) 112 dB(A)
Sound power level 2) 112 dB(A)
Vibration level, right with plastic tool 3) 3,5 m/s²
Vibration level, left/right with metal tool 3) 2/2 m/s²
Vibration level, left with plastic tool 3) 3,6 m/s²
Total length 4) 28 m
Cutting diameter 420 mm

1) Without fuel, cutting tool and without protection
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m/s ²
4) Without cutting tool

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

FR 460 TC-EFM

Standard equipment

  • STIHL ErgoStart (FT) Zoom
    STIHL ErgoStart (FT)

    Easy starting is achieved by an additional spring between the crankshaft and the starter cord reel. One smooth, steady pull is all it takes for reliable starting of power tools fitted with STIHL ErgoStart. Standard with all CE models.

  • STIHL ElektroStart Zoom
    STIHL ElektroStart

    The new dimensions of the ErgoStart: The STIHL E-Start.The FR 480 C-F brushcutter can be carried on your back and is turned on by pushing a button on the multi-function handle, so you don't have to put it down. Easy to fill, purge and start up. The starter battery charges itself up during operation, so the device is always ready to be used. (similar to illustration)

  • STIHL 2-MIX engine with stratified charge system Zoom
    STIHL 2-MIX engine with stratified charge system

    The STIHL two stroke engine with 2-MIX technology ensures a high power output and excellent torque levels while reducing fuel consumptioon by up to 20%*. It combines a four-channel cylinder with a stratified charge system. Exhaust emissions are also lowered by up to 70%*. The engine is compliant with EU II European emissions standard. (*Compared with STIHL 2-stroke engines of the same power output without 2-MIX technology. Percentages may vary depending on model.)

  • STIHL M-Tronic (FT) Zoom
    STIHL M-Tronic (FT)

    This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. STIHL M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. STIHL M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

  • Detachable shaft Zoom
    Detachable shaft

    The shaft can be detached without the use of tools for easy storage and transport.

  • Loop handle (R) Zoom
    Loop handle (R)

    The loop handled grass trimmers and brushcutters are ideal for working in areas where space is limited, e.g. thinning between bushes and shrubs.

  • Stop button Zoom
    Stop button

    You do not need to control the stop button when restarting. The engine can be started at any time. (similar to illustration)

  • Shoulder strap / carrying system Zoom
    Shoulder strap / carrying system

    Using a STIHL shoulder strap or carrying harness with soft padding makes work more comfortable, particularly during lengthy jobs.

  • Multi-function control handle Zoom
    Multi-function control handle

    Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.

  • Anti-vibration system Zoom
    Anti-vibration system

    Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

  • Choke lever (M-Tronic) Zoom
    Choke lever (M-Tronic)

    This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.

  • Compensator Zoom
    Compensator

    A controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.

  • Goggles Zoom
    Goggles

    It is important to protect your eyes from debris and harmful UV radiation. A pair of safety glasses is supplied with this machine. Please note, additional face protection must be worn when working with brushcutters.

  • Long life air filter Zoom
    Long life air filter

    The easily accessible filter paper ensures long service intervals.

  • Tool bag Zoom
    Tool bag

    A practical way of transporting tools. Two compartments. Easily attached to the universal or forestry harness.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Cutting Tools

FR 460 TC-EFM

Cutting Tools

    • TrimCut mowing head C 32-2 Zoom
      TrimCut mowing head C 32-2

      Double line, for mowing and thinning work. Mowing lines are extended by hand.

    Versions

    • AutoCut C mowing head (2-line) Zoom
      AutoCut C mowing head (2-line)

      Double lines, for mowing and thinning work. Mowing lines are automatically extended when the mowing head is tapped on the ground. With comfort grip for easy re-loading.

    Versions

    • AutoCut mowing head 36-2 Zoom
      AutoCut mowing head 36-2

      Two lines, for mowing and clearing work. Mowing lines are automatically extended by tapping the mowing head on the ground.

    Versions

    • SuperCut mowing head (2 line) Zoom
      SuperCut mowing head (2 line)

      Double line, for mowing and thinning work. Mowing lines are automatically adjusted for optimal cutting length.

    Versions

    • Mowing line SuperCut 20-2

    • GrassCut Grass cutting blade (2 blades) Zoom
      GrassCut Grass cutting blade (2 blades)

      Steel double blade, reversible. For working on areas of tough grass.

    Versions

    • GrassCut Grass cutting blade (4 blades) Zoom
      GrassCut Grass cutting blade (4 blades)

      Made of steel. With four cutters for mowing thick, dry grass and reeds

    Versions

    • Grass cutting blade 230 mm (4 blade)

    • GrassCut Grass cutting blade (8 teeth) Zoom
      GrassCut Grass cutting blade (8 teeth)

      Made of steel with 8 teeth for mowing thick, dry grass and reeds.

    Versions

    • Grass cutting blade 230 mm (8 teeth)

    • GrassCut Grass cutting blade 250-44 Zoom
      GrassCut Grass cutting blade 250-44

      Low-throw, steel grass-cutting blade with 44 teeth (diameter: 250 mm). Clippings are not scattered, and the risk of stones flying up as debris is low. Ideal for mowing tough, dry grass and stubborn weeds. Suitable for reeds and bushes. Use only with the universal guard.

    Versions

    • BrushCut Brush knife Zoom
      BrushCut Brush knife

      Brush blade made of special steel. Ideal for thinning and clearing tough, matted grass and scrub. Also the pruning of thorn hedges. For use with universal protection.

    Versions

    • 250 mm (3 blade)

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

FR 460 TC-EFM

Accessories

    • Universal guard Zoom
      Universal guard

      Excellent protection against flying cuttings or stones. With or without an apron for mowing heads.

    Versions

    • Universal guard

    • Universal guard Zoom
      Universal guard

      Excellent protection against flying cuttings or stones. With or without an apron for mowing heads.

    Versions

    • Guards for line mowing heads and PolyCut Zoom
      Guards for line mowing heads and PolyCut

      Guard for working with mowing heads. Provides protection against flying debris but still enables a clear view of the area to be mown.

    Versions

    • Stop kit for circular saw blades Zoom
      Stop kit for circular saw blades

      Stop kit and protection for circular saw blades. For accurate cutting with a circular saw blade.

    Versions

    • Stop kit for circular saw blades, Ø 200 mm

    • Upgrade Kit GrassCut 250-32
      Upgrade Kit GrassCut 250-32

      For converting clearing saws that have a nylon mowing head to the GrassCut 250-32 low-spin grass-cutting blade, including all attachments and transport guard. Consists of: 1 × GrassCut 250-32 1 × metal tool transport guard 1 × rider plate 1 × thrust washer 1 × collar nut For FSA 130, FSA 135, FS 89, FS 91, FS 94, FS 111, FS 131, FS 240, FR 131 T, FR 410, FR 460 and FR-KM.

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Documents

Owners manuals and safety brochures