Correct refuelling
with tools

A number of fundamental safety instructions must be observed before refuelling your STIHL chainsaw:

Lay the chainsaw on a clean surface
The machine should preferably be refuelled on a clean, level surface. Lay the chainsaw down so that the tank openings face upwards.

Lay the chainsaw on a clean surface

Clean the tank openings
Clean the area around the tank openings with a clean cloth.

Clean the tank openings

Open the tanks with a tool
Open the two tanks (fuel tank and chain oil tank) with a spanner or with the combination wrench.

Open the tanks with a tool
Open the tanks with a tool

Filling with fuel and lubricant
Fill the two tanks slowly and carefully. Fill the fuel mixture into the fuel tank and the chain oil into the oil tank. The transparent tanks on the machine ensure that the level is always easy to see. In addition, STIHL has developed a patented filling system for fuel and chain oil to ensure that nothing is spilled.
Note: This filling system is not available in all countries. Please contact your authorised STIHL dealer.

Filling with fuel and lubricant

Close the tanks
Unit vibrations can cause an improperly tightened fuel filler cap to loosen or come off and spill quantities of fuel. In order to reduce the risk of fuel spillage and fire, tighten the fuel filler cap by hand as securely as possible. The screwdriver end of the STIHL combination wrench or other similar tool can be used as an aid in tightening slotted fuel filler caps. Check for fuel leakage while refueling and during operation. If fuel leakage is found, do not start or run the engine until the leak is fixed and any spilled fuel has been wiped away. Take care not to get fuel on your clothing. If this happens, change your clothing immediately.

Close the tanks

Please note: This is an offer by ANDREAS STIHL AG & Co. KG, Germany. Please read the notes on your respective country page www.stihl.com and the country-specific instructions for use of your product.