Starting procedure, shown on the FS 55 C-E
The working area has been made safe and checked and you are wearing full personal protective equipment. Before starting up your brushcutter please read the manual carefully and be sure to follow the safety instructions it contains. Then you can start using your brushcutter.
Step 6 of 14: Move the choke shutter lever to the „Choke cold start“ position
Step 6 of 14: Move the choke shutter lever to the „Choke cold start“ position
If the engine is cold, the choke shutter must be closed. Move the choke lever to the appropriate position to close it. If the engine is hot, leave the choke off (bottom position)
Video
Brushcutter starting procedure
Starting a brushcutter - step by step.
| Flash 4.7 MB |