Filling mowing heads - AutoCut C 25-2

The AutoCut C has a line storage device and the line is fed while the machine is running. This is done by tapping the top of the mowing head on the ground. This opens the holding mechanism for the line and centrifugal force causes line to be fed out.

With the AutoCut C, mowing line replacement is an especially fast and simple procedure. It is neither necessary to open the mowing head for refilling nor is it necessary to prepare equal lengths of mowing line.

The line may only be replaced when the engine is switched off.

Step 1 of 4: Bring the mowing head bobbin into position

Animation regarding "Bringing the mowing head bobbin into position"

Step 1 of 4: Bring the mowing head bobbin into position

Bring the mowing head bobbin into position so that the arrows on the mowing head are located opposite the round indentations on the bobbin.

Video