Filling mowing heads - AutoCut 25-2
The AutoCut mowing head has a line storage device and the line is fed while the machine is running. This is done by tapping the top of the mowing head on the ground. This opens the holding mechanism for the line and centrifugal force causes line to be fed out.
The line may only be replaced when the engine is switched off.
Step 1 of 7: Opening the mowing head
Step 1 of 7: Opening the mowing head
Open the mowing head by pressing sideways on the indentations in the mowing head. First press one side so far toward the inside that the catch disengages, then press on the other side. Then remove the cover of the mowing head.
Video
Filling mowing heads
AutoCut 25-2 - Step by step.
| Flash 18.2 MB |