HS 87 R, 75 cm
Professional hedge trimmer with single-sided blade
Professional hedge trimmer with 2-Mix engine technology. The HS 87 R boasts a single sided cutting blade designed to cut through the toughest of hedges. Large teeth and a lower blade speed allows the tool to cope with thick growth. With a reduction in weight and increased efficiency, these machines will make light work of all trimming tasks.
- HS 87 R, blade length 75 cm
The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.
|Power output||0,7/1 kW/bhp|
|Weight 1)||5,5 kg|
|Sound pressure level 2)||96 dB(A)|
|Sound power level 2)||106 dB(A)|
|Vibration levels left/right 3)||2,3/2,4 m/s²|
|Total length||124 cm|
|Stroke rate||3.200 1/min|
|Tooth spacing||38 mm|
|Blade length||75 cm|
Without fuel, complete
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) (K) factor according to Dir. 2006/42/EC = 2m/s²
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
The STIHL 2-mix engine specially designed for the new generation of hedge trimmer combines low consumption and emissions with low weight and excellent acceleration. There are also always sufficient power reserves for cutting thicker shrubs.
STIHL hedge trimmers with single-sided blades are ideal for cutting between waist and chest height hedges.
Cutting variation (R)
The R variations of the STIHL HS 81 and STIHL HS 86 are designed specifically for large volume cutting. They feature a cutting blade with wide tooth spacing and longer tooth height. The gearing allows a high cutting power at a medium stroke rate. The R variations provide the possibility of cutting thicker branches and completing clearing work faster.
Electronic ignition module
This ensures reliable starting and trouble-free running. The ignition system is fully encapsulated and thus protected from damp and dirt.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting pulls required following extended breaks in operations.
Long-life air filter system
Ensures longer cleaning intervals and better protection of the engine.
Suspension lug in handle
Tool free filler cap
Patented special filler caps for fuel and oil. These filler caps can be opened and closed again quickly and easily, without tools.
Single lever operation
The choke, start gas, operating position and stop function are integrated onto one operating element. Stop button with a single lever operation After pressing the stop button, the shaft jumps back to position I. The hedge trimmer is ready to start again immediately, thus preventing an incorrect operation. (similar to illustration)
Double-sided cutting blade
The cutting blade is sharpened on both sides. The sophisticated blade geometry makes for a job well done.
- 75 cm / 30" - Suitable for the HS 81 R, HS 86 R
Catcher plate for cutter blades
Plastic plate for catching the cuttings. For 75 cm and 100 cm bar lengths.
- Suitable for HS 86 R
Blade tip protection for HS 86 R/T
The leadership protection protects the point of the hedge-trimmer knives against wear at work with ground contact.
- Guide guard HS 86 R