TS 800

• 

  SEMI-AUTOMATIC STIHL BELT TENSIONING

  EXTENDS THE BELT’S SERVICE LIFE. Semi-automatic STIHL belt tensioning makes it easier for you to re-tension the drive belt. All you need is to adjust the adjustment screw with your spark plug wrench. Consistent tension extends the service life of the belt and bearing. For more detailed information on re-tensioning, please refer to the operating instructions of your power tool.

• 

  STIHL 2-MIX engine with stratified charge system

  2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.

• 

  STIHL ElastoStart

  STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.

• 

  ERGONOMIC HANDLE

  FOR PRECISE GUIDANCE. With the ergonomic handle, you can keep a firm grip on your power tool and carry out cuts precisely, even when dealing with very hard stone. The curved handle offers you an optimised grip position and the highest level of comfort when working.

• 

  LONG-LIFE AIR FILTER SYSTEM FOR CUT-OFF MACHINES

  ENSURES A LONG FILTER SERVICE LIFE. The long-life air filter system for cut-off machines does not collect coarse dust particles, but uses cyclone air routing to separate them and then discharges them into the ambient air. With just this first step the system removes around 80% of dust particles in the intake air. This enables an extremely long filter service life, and makes the tool easy to maintain.

• 

  Manual fuel pump (Purger)

  A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.

• 

  Decompression valve

  The decompression valve allows some of the compression pressure in the cylinder to escape, so less force on the starter rope is needed.

• 

  WATER CONNECTION

  FOR DUST BINDING AND COOLING. When working with your power tool, a permanent water supply is provided for flushing the cutting wheel. It is used to bind dust and cool the cut. With the water connection directly on the power tool, this rinsing is easy and permanently assured.

• 

  Anti-vibration system

  Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.

Retrofitted equipment

• 

  Cut-off saw cart

  Ideal wherever edges have to be cut with particular precision, where a certain cutting depth needs to be maintained, or for cutting long, linear stretches.

• • 

    Wheel kit

    Attachment kit for front support. Makes it easier to rest the cut-off saw on the floor. The smooth-running wheels allow the tool to be moved easily across flat, even surfaces. Suitable for TS 410, TS 420, TS 480i, TS 500i, TS 700 and TS 800.

  Versions

  • Wheel kit
    Note and compare

• • 

    FW 20 Cart with attachment kit

    For exact edges over long cuts, with depths accurate to the millimetre. Suitable for all hand-held STIHL cut-off machines, an attachment kit with a quick-mounting system is included.

  Versions

  • FW 20 cart attachment kit for TS 700 and TS 800
    Note and compare

• • 

    Wheel kit

    Attachment kit for front support. Makes it easier to rest the cut-off saw on the floor. The smooth-running wheels allow the tool to be moved easily across flat, even surfaces. Suitable for TS 410, TS 420, TS 480i, TS 500i, TS 700 and TS 800.

  Versions

  • Wheel kit
    Note and compare

• • 

    Cutting direction indicator

    Accessory for FW 20 cart.

  Versions

  • Cutting direction indicator
    Note and compare

• • 

    Quick Mounting System conversion kit

    For the FW 20 cart.

  Versions

  • Quick Mounting System conversion kit, TS 700, TS 800
    Note and compare