Selection Chainsaws, saw chains, guide bars

MS 192 C-E Carving chainsaw

General

MS 192 C-E, Carving
More pictures

Extremely light and easy to use carving chainsaw with ErgoStart for easier starting. Specially developed carving chain with low vibration and reduced kick back. Very small track teeth for exact cutting of small radii and contours. Perfect for demanding carvers, arborists and fruit farmers.

Versions


The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Technical data

MS 192 C-E Carving chainsaw

Technical data

Displacement 30,1 cm³
Power output 1,3/1,8 kW/bhp
Weight 1) 3,3 kg
Power-to-weight ratio 2,5 kg/kW
Sound pressure level 2) 99 dB(A)
Sound power level 2) 112 dB(A)
Sound power level 2) 110 dB(A)
Vibration level left/right 3) 4,6/4,6 m/s²
Saw chain pitch 1/4"
STIHL Oilomatic saw chain type Rapid Micro Spezial (RMS)

1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Features

MS 192 C-E Carving chainsaw

Standard features

  • STIHL ErgoStart (E) Zoom
    STIHL ErgoStart (E)

    A spring between the starter cord reel and crankshaft relieves the strain when starting, meaning that excessive pulling on the cord is no longer needed. The result is a convenient starting procedure with practically.

  • Compensator Zoom
    Compensator

    This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.

  • Manual fuel pump (Purger) Zoom
    Manual fuel pump (Purger)

    STIHL chainsaws and pole pruners with manual fuel pumps allow improved starting with a reduced number of starting pulls. Pressing the primer fills the carburettor control chamber with fuel. This ensures that there is sufficient fuel present to create an ignitable air-fuel mix on starting, requiring significantly fewer starting pulls.

  • STIHL anti-vibration system Zoom
    STIHL anti-vibration system

    Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

  • STIHL Ematic System Zoom
    STIHL Ematic System

    Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

  • Side-mounted chain tensioning Zoom
    Side-mounted chain tensioning

    Side-mounted chain tensioning makes it easy to tension the chain safely.

  • Tool free fuel caps Zoom
    Tool free fuel caps

    Special caps to open and close the tank cap quickly, easily and without tools.

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Accessories

MS 192 C-E Carving chainsaw

Accessories

    • Chainsaw bag Zoom
      Chainsaw bag

      For tidy storage and transport of chainsaws with bar lengths up to 45 cm.

    Versions

    • Combination socket tool, width across flats 19–16 Zoom
      Combination socket tool, width across flats 19–16

      For tensioning the chain and changing the chain, bar and spark plug. Suitable for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.

    Versions

    • Multi-function tool Zoom
      Multi-function tool

      Practical, multi-function quality tool in a sturdy plastic case. 3.5 mm flat-blade screwdriver for carburettor adjustment and cleaning grooves, Torx® TX 27 screwdriver, nylon pouch with belt loop. Width across flats 19-13 for MS 271, MS 291, MS 311 and MS 391, width across flats 19-16 for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.

    Versions

The version(s) available in each country may differ from the above range and specifications; specific details may be subject to change without notice. Please ask your local STIHL Approved Dealer for further information.

Cookies on the STIHL website

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on our STIHL website. If you would like to learn more about the usage of cookies please click here.

OK