Direct product selection: Petrol chainsaws for forestry

MS 241 C-M VW

MS 241 C-M VW petrol-driven chainsaw: powerful for forestry work in winter

General

Excellent for harvesting thin wood with higher engine power and lower weight. Standard-fitted with STIHL M-Tronic, long-life air filter system with HD2 filter requires only occasional cleaning, captive nut on the sprocket cover, economical STIHL 2-MIX engine, 3/8" PS saw chain for very high cutting performance. With handle and carburettor heating.

Versions



Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Product versions

  • MS 241 C-M MS 241 C-M petrol-driven chainsaw: versatile and powerful for harvesting thin wood

Technical specifications

MS 241 C-MVW Lüfterseite

Technical specifications

Technical specifications Value
Displacement 42,6 cm³
Power output 2,3/3,1 kW/PS
Weight 1) 4,8 kg
Power-to-weight ratio 2,1 kg/kW
Sound pressure level 2) 103 dB(A)
Sound power level 3) 115 dB(A)
Vibration level left/right 4) 2,9/2,9 m/s²
Saw chain pitch 3/8"P
STIHL Oilomatic saw chain type Picco Super (PS)

1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 (dB (A))
3) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
4) K-factor according to DIR 2006/42/EC = 2m / s ²

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Features

MS 241 C-MVW Lüfterseite

Standard equipment

  • STIHL M-Tronic (FT) Zoom
    STIHL M-Tronic (FT)

    For a cold start, the STIHL M-Tronic only needs one start position on the combi-lever. After starting, you can immediately power up to full speed. The amount of fuel required is precisely calculated by the system and supplied as needed. Otherwise, start in position I as usual.

  • STIHL ElastoStart Zoom
    STIHL ElastoStart

    Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.

  • ELECTRICALLY HEATED HANDLES Zoom
    ELECTRICALLY HEATED HANDLES

    FOR USE IN FROSTY TEMPERATURES. The electric heating in the handle and rear handle can be easily switched on as required. This means that your hands stay warm even in cold weather and you keep a secure grip on your power tool. The handle heating system consists of maintenance-free and wear-free heating foils.

  • CARBURETTOR PRE-HEATING Zoom
    CARBURETTOR PRE-HEATING

    FOR RELIABLE OPERATION EVEN IN WINTER. Thanks to carburettor preheating, you can work reliably with your chainsaw even in winter. You can change the operation from summer to winter mode in just one simple step. In the winter setting, pre-heated intake air flows around the carburettor, preventing it from icing up.

  • CONTROLLED-DELIVERY OIL PUMP Zoom
    CONTROLLED-DELIVERY OIL PUMP

    OIL CONSUMPTION BASED ON NEED. The controlled-delivery oil pump reduces your chainsaw’s oil consumption by up to 50%. To use it, simply select the E position. For very long cutting attachments or very dry wood, an additional oil volume can be set by the user.

  • CARBURETTOR HEATING Zoom
    CARBURETTOR HEATING

    WORK WITHOUT INTERRUPTION, EVEN IN FROST. Thanks to electric carburettor heating, you can work without interruption even in frosty weather conditions. You do not need to keep an eye on the temperature, as the heating element activates automatically at critical temperatures thanks to temperature-dependent switch-on and switch-off controls. The heater then heats up the carburettor to prevent freezing.

  • SIDE-MOUNTED CHAIN TENSIONING Zoom
    SIDE-MOUNTED CHAIN TENSIONING

    FOR SIMPLE AND SECURE RE-TENSIONING. Side-mounted chain tensioning allows for protected, easy and quick chain tensioning and replacement. The tensioning screw is inserted laterally through the sprocket cover.

  • LONG-LIFE AIR FILTER SYSTEM FOR CHAINSAWS Zoom
    LONG-LIFE AIR FILTER SYSTEM FOR CHAINSAWS

    EXTENDED FILTER SERVICE LIFE. Pre-separation routing removes coarse, larger particles from the airstream before they can reach the actual filter. The HD2 filter keeps even fine dust away from the engine, ensuring a long engine service life, long cleaning intervals and easy maintenance of your chainsaw. When we refer to a long-life air filter system in chainsaws, this exclusively describes models that have pre-separation routing and an HD2 filter. With this system, you benefit from a significantly longer filter service life compared to conventional air filter systems.

  • HD2-FILTER Zoom
    HD2-FILTER

    INCREASES SERVICE LIFE. The HD2 filter protects your power tool’s engine against even the finest dust, ensuring a longer service life and reduced wear. The filter made from PET material has up to 70% finer pores than fleece and polyamide filters, and is also oil- and water-repellent. This also makes it easier to clean the filter. When needed, the filter cartridge can be easily replaced without tools.

  • STIHL FOUR-CHANNEL TECHNOLOGY Zoom
    STIHL FOUR-CHANNEL TECHNOLOGY

    FOR LOWER FUEL CONSUMPTION AND HIGH PERFORMANCE. Thanks to STIHL four-channel technology, you can work with your power tool with very low fuel consumption and high performance. The four overflow channels guide the fuel-and-air mixture into the cylinder in a targeted and more compressed manner, which optimally burns the fuel and significantly increases the performance of the engine.

  • COMPENSATOR Zoom
    COMPENSATOR

    REDUCED MAINTENANCE. The compensator is a control system in the carburettor, which uses pressure compensation to ensure that engine performance, exhaust gas quality and fuel consumption remain virtually constant over a long period of time, despite increasing contamination of the air filter. You do not need to clean the air filter until there is a noticeable drop in performance. This means that you can work for a long time without maintenance.

  • MANUAL DECOMPRESSION Zoom
    MANUAL DECOMPRESSION

    EFFORTLESS START-UP. The decompression valve makes it easier to start your power tool. When starting, you can allow some of the compressed mixture to escape from the cylinder by opening the valve. This protects the start-up system and reduces the amount of force required on the starter cord.

  • STIHL ANTI-VIBRATION SYSTEM Zoom
    STIHL ANTI-VIBRATION SYSTEM

    FOR MORE PLEASANT WORK. Vibrations can occur when you put your power tools through their paces, and these are particularly noticeable in the grip area. The buffer and spring elements of the STIHL anti-vibration system reduce the transmission of engine vibrations to the handle area and therefore to your body. The result is that your power tool is more comfortable to hold and your work is much less tiring.

  • STIHL Ematic System Zoom
    STIHL Ematic System

    Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

  • Combi lever Zoom
    Combi lever

    As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.

  • COMBI LEVER WITH STOP FUNCTION Zoom
    COMBI LEVER WITH STOP FUNCTION

    SIMPLIFIED OPERATION. Only one start position is required on the combi lever. Thanks to the stop function, once the machine is turned off the control lever immediately moves back into the operating position. This allows a warm machine to be restarted immediately.

  • CAPTIVE NUTS Zoom
    CAPTIVE NUTS

    PROTECTION AGAINST LOSS The nuts are attached to the sprocket cover in a captive manner. This makes it impossible for the nuts to fall off and get lost when the cover is removed.

  • Tool free fuel caps Zoom
    Tool free fuel caps

    Special caps to open and close the tank cap quickly, easily and without tools.

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Accessories

MS 241 C-MVW Lüfterseite

Accessories

    • Combination socket tool Zoom
      Combination socket tool

      For tensioning the chain and changing the chain, bar and spark plug. Width across flats: 19 (for MS 261 up), 19-13 (for MS 271, MS, 291, MS 311, MS 391), 19–16 (for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241, MS 251), 16 and 13 ( for MS 150, MS 201, MS 201 T).

    Versions

    • Combination socket tool

    • Chainsaw bag Zoom
      Chainsaw bag

      For tidy storage and transport of chainsaws with bar lengths up to 45 cm.

    Versions

    • Chainsaw case Zoom
      Chainsaw case

      For storage and transport of all battery-powered and petrol chainsaws with bar lengths up to 45 cm (not suitable for electric chainsaws and petrol chainsaws MS 441 C-M, MS 461, MS 661 C-M and MS 880).

    Versions

    • Combination socket tool, width across flats 19–16 Zoom
      Combination socket tool, width across flats 19–16

      For tensioning the chain and changing the chain, bar and spark plug. Suitable for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.

    Versions

    • Multi-function tool Zoom
      Multi-function tool

      Practical, multi-function quality tool in a sturdy plastic case. 3.5 mm flat-blade screwdriver for carburettor adjustment and cleaning grooves, Torx® TX 27 screwdriver, nylon pouch with belt loop. Width across flats 19-13 for MS 271, MS 291, MS 311 and MS 391, width across flats 19-16 for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.

    Versions

    • Laser 2-in-1 Zoom
      Laser 2-in-1

      Felling direction indicator and cutting guide in one. For cutting short pieces of wood without complicated measuring, can be used as a felling direction indicator to check the cuts and felling direction, demonstration video on DVD. Choose the holder suitable for your chain saw.

    Versions

    • Holder 1143 for STIHL Laser 2-in-1 Zoom
      Holder 1143 for STIHL Laser 2-in-1

      MS 231, MS 241, MS 251, all design variants except VW

    Versions

Deviations from the product range and information provided here are possible, depending on the country. STIHL reserves the right to make changes to technical specifications and equipment.

Documents

Owners manuals and safety brochures

Languages Date Link
manual icon de / fr / it 22.06.2023