MS 441 C-M
STIHL's most advanced pro chainsaw ever!
STIHL's most advanced pro chainsaw ever! The MS 441 C-M features STIHL M-Tronic, a fully electronic controlled ignition timing and fuel metering system. This modern, low vibration and high performance saw is simple to start and operate by automatically adjusting to the conditions you are working in. The M-Tronic system even remembers your settings from the last time you used the tool for quick and easy use. Optimised power to weight ratio. Very low vibration levels. Up to 20% less fuel consumption and 50% fewer emissions compared to conventional two-stroke engines without 2-MIX technology.
MS 441 C-M, Bar length 40 cm
MS 441 C-M, Bar length 45 cm
MS 441 C-M, RS, Bar length 50 cm
Deviations from the product range and information provided here are possible, depending on the country. VIKING reserves the right to make changes to technical specifications and equipment.
- MS 441 C-M STIHL's most advanced pro chainsaw ever!
|Power output||4,2/5,7 kW/bhp|
|Weight 1)||6,6 kg|
|Power-to-weight ratio||1,6 kg/kW|
|Sound pressure level 2)||105 dB(A)|
|Sound power level 2)||118 dB(A)|
|Vibration level left/right 3)||3,1/3,3 m/s²|
|Saw chain pitch||3/8"|
|STIHL Oilomatic saw chain type||Rapid Super (RS)|
1) Without fuel, without bar and chain
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
STIHL M-Tronic (M)
For a cold start, the STIHL M-Tronic only needs one start position on the combi-lever. After starting, you can immediately power up to full speed. The amount of fuel required is precisely calculated by the system and supplied as needed. Otherwise, start in position I as usual.
Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.
STIHL 2-MIX engine
The two-stroke engine with STIHL 2-MIX technology saves up to 20 % of fuel and reduces emissions by up to 70 % compared to STIHL 2-stroke engines of the same performance class without 2-MIX technology.
Carburettor heating (V)
By changing the chain saw from summer to winter operation, the intake air is pre-heated over the engine fins. This ensures that the carburettor does not ice up and you can continue working in freezing temperatures.
Controlled-delivery oil pump
Different bar lengths, wood types and sawing techniques require different amounts of oil. The controlled-delivery oil pump allows the user to select just the right amount of oil for the job at hand.
Side-mounted chain tensioning
Side-mounted chain tensioning makes it easy to tension the chain safely.
Pre-separation air filtration system
STIHL long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
This air filter keeps even the finest dust away from the engine, ensuring a particularly long service life. Thanks to its special material, the filter can easily be cleaned by washing, for example with STIHL Varioclean and warm water.
Advanced combustion technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range.
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.
STIHL anti-vibration system
Precisely calculated buffer zones minimise the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.
STIHL Ematic System
Compared to conventional bars without Ematic, the STIHL Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a STIHL Ematic or Ematic S guide bar, a STIHL Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.
As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
Tool free fuel caps
Special caps to open and close the tank cap quickly, easily and without tools.
- Carry bag for chainsaws
Combination socket tool
For tensioning the chain and changing the chain, bar and spark plug. Width across flats: 19 (for MS 261 up), 19-13 (for MS 271, MS, 291, MS 311, MS 391), 19–16 (for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241, MS 251), 16 and 13 ( for MS 150, MS 201, MS 201 T).
- Combination socket tool, width across flats 19-13
Practical, multi-function quality tool in a sturdy plastic case. 3.5 mm flat-blade screwdriver for carburettor adjustment and cleaning grooves, Torx® TX 27 screwdriver, nylon pouch with belt loop. Width across flats 19-13 for MS 271, MS 291, MS 311 and MS 391, width across flats 19-16 for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.
- Multi function tool, size across flats 19 - 13
Owners manuals and safety brochures
|STIHL MS 441 C-M (D)||Download||PDF, 2,4 MB|
|STIHL MS 441 C-M (D, F, I)||Download||PDF, 5,7 MB|
|STIHL MS 441 C-M (D, F, I, NL)||Download||PDF, 7,4 MB|
|Sicheres Arbeiten mit dem Trennschleifer (D)||Download||PDF, 1,3 MB|
|Sicheres Arbeiten mit der Heckenschere (D)||Download||PDF, 764 KB|
|Sicheres Arbeiten mit der Motorsäge (D)||Download||PDF, 1011,7 KB|
|Sicheres Arbeiten mit einem Reinigungsystem (D)||Download||PDF, 935,7 KB|
|Sicheres Arbeiten mit Motorsense und Freischneider (D)||Download||PDF, 810,1 KB|
- STIHL online owner’s manuals are usually for the latest versions of the machine. Your product may be a slightly older production model but the manual will still be appropriate for the relevant model number
- The languages contained in the document are also displayed in brackets, for example (GB) = English